810848

Edilkamin Double Manual

21
Zoom out
Zoom in
Previous page
1/62
Next page
21
ENGLISH
6
6
7
7
Cleaning the plant
Once a year, at the beginning of the season requiring the use of heating, it is necessary to check that the smoke channel and all fuel gas
discharge conduits are free. Therefore clean them well. Eventually remove the volatile ash using an appropriate ash sucker. Consult, if
possible, an EDILKAMIN dealer with regard to the eventual necessary control and maintenance measures.
Important note
In case of faults to the DOUBLE hearth or to the smoke channel, like to any fuel gas discharge conduit (obstructions, blockings), consult, if
possible, an EDILKAMIN dealer.
Only use original spare parts from the manufacturing company, only like this it is possible to rely on the safe working of the plant.
Any eventual modification to the hearth can only be carried out by personnel authorised by the manufacturer.
The improper use of the appliance leads to the voiding of the warranty.
The appliance is intended to be used properly only when the present use instructions are observed.
• Keep the present instructions which must be used for eventual information requests.
• The particulars represented are graphically and geometrically indicative.
EDILKAMIN Reserves the faculty to modify at any time, without prior warning, the technical and aesthetical features of the elements
illustrated in the present catalogue.
Cleaning the glass
To clean the glass, it is possible to open with door the hearths panel.
For this purpose, it is necessary, before opening, to block the hatch in its
closing position, by rotating the stop lever (6 fig. 1) towards the centre.
At this point it is possible to unblock, using the appropriate tool (cold hand) provided,
the pallet plates ( 7- fig.3 ) at the right and left side of the hatch (rotate by 90°).
The panel can now be tilted open and cleaned.
Once cleaned, fix the pallet plates again( 7 - fig.4 ) and unblock the stop lever
(6 - fig.2).
Should there only be a slight coat of dirt on the glass, clean it using a dry cloth whilst it is still warm.
In case of more consistent dirt, EDILKAMIN supplies an appropriate product
“GlassKamin”, which can be found through the authorised retailers.
Never use abrasive products or aggressive detergents!
Removing the ash
You can remove the ash using a shovel or with an ash sucker. Only place the ash in non
fuelling containers. The residual coal may re-ignite even after more than 24 hours from last
fuelling.
Figure 1: blocked stop lever
Figure 2: unblocked stop lever
Figure 3: open hatch blocked (rotate
the pallet by 90°)
Figure 4: closed hatch blocked
(rotate the pallet by 90°)
CLEANING AND MAINTENANCE
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Double at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Double in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info