810764
14
Zoom out
Zoom in
Previous page
1/28
Next page
- 14 -
ENGLISH
INSTRUCTIONS FOR USE
Fig. 2
C
NOTE:
AT the end of loading wood, the customer can decide to
continue using wood or automatically switch to pellets.
Press the O/I button on the remote control. The display
reads “AUTO WOOD”, if the wood is already lit in the
combustion chamber, or a pellet ignition phase is started
that will automatically switch to wood burning as soon as
combustion has started.
Wet or fresh cut wood or wood stored improperly present a
high water content and therefore do not burn properly, create
smoke and produce little heat. Only use rewood which has
been seasoned for a minimum of year two years in a ventila-
ted and dry environment. In this case, water content will be
below 20% of the weight. This way you will save in terms of
combustible material, as the seasoned wood has a much higher
caloric value. Never use liquid fuels such as gasoline, alcohol
or similar. Do not burn waste.
Note:
Seasoned wood has a caloric value of approximately 4 kWh/
kg, while fresh cut wood has a caloric value of only 2 kWh/
kg. Therefore, to achieve the same caloric value you would
have to use double the fuel.
NOTE regarding the fuel: wood
The stove must be fuelled with wood, preferably well-seaso-
ned beech/birch; the quantity of wood required is specied in
the technical table on page 32 (20-25 cm in length). Each type
of wood has different characteristics that also affect the com-
bustion yield. The stove’s nominal yield declared in kW can be
obtained by burning the right amount of wood (specied in the
table on page 32).
Fuel and heating power
Combustion has been optimised from a technical point of view
both with regards to the design of the hearth and its air supply as
well as in terms of emissions. Please support our commitment
to a clean environment by observing the directions listed below
regarding the use of combustible materials that do not contain
and do not produce harmful substances. As far as fuel, use only
natural and seasoned wood or wood briquettes
.
OPEN
CLOSED
WOOD OPERATION (green led wood func-
tion with power/led off, wood function without
power.)
When using wood, the draught is natural.
When the door is opened during operation, a by-pass valve
connects the combustion chamber directly to the ue to prevent
fumes from coming out of the door.
Lighting can be performed in the following manner:
- MANUAL LIGHTING = lighting the wood with a relighter
and closing the door
- AUTOMATIC LIGHTING = using the remote control and
pressing key “A” for 2 seconds starts the pellet lighting-phase,
which allows wood burning.
The primary combustion air enters just above the re surface
meeting the free surface of the embers.
The post-combustion air enters the combustion chamber
through the holes located inside the combustion chamber.
The air coming out of the holes hits the fume ow and triggers
a second combustion process that burns the unburned fuel and
the carbon monoxide:
this process is called post-combustion.
Combustion air valve
The combustion air is adjusted with a valve whose control is
located on the top (C - Fig. 2).
Note: use the special glove provided to avoid burns.
“Lighting”/max heating capacity position:
Air valve lever completely pushed in.
Lighting the cold stove and maximum combustion-chamber
power
“Slow burning” position:
Air valve lever in intermediate position.
All combustion air vents are partially closed.
“Switching off”/min heating capacity position:
Air valve lever completely lifted.
All combustion air vents are closed.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Demy at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Demy in the language / languages: English as an attachment in your email.

The manual is 5.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin Demy

Edilkamin Demy Usermanual and installation guide - German - 28 pages

Edilkamin Demy Usermanual and installation guide - Dutch - 28 pages

Edilkamin Demy Usermanual and installation guide - French, Italian - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info