810907
20
Zoom out
Zoom in
Previous page
1/28
Next page
20
ENGLISH
Pellet-loading adjustment: (with self-regulation deactiva-
ted). Press and hold the menu key for two seconds to gain
access to the language menu, use the + key to find the
ADJ PELLET” menu, con¬firm the menu with the M key,
and the message “PELLET ADJ 00%” will appear on the
display.
The pellet drop can be adjusted manually by changing the
capacity in percentage terms (+/- 30 %).
By confirming this function with the menu key, you can
access the function to adjust pellet loading. By decreasing
the
value set, pellet loading is decreased. By increasing the
value set, pellet loading increases. This function is useful if
changing the pellet type for which the stove has been cali-
brated and loading therefore needs correcting.
Should this correction not suffice, contact the Edilkamin-
authorised Dealer, to establish the new operating axis.
Notes on flame variability
Flame status may vary depending on the type of pellet
used, in addition to normal solid fuel flame variability and
regular combustion chamber cleaning carried out automa-
tically by the boiler.
(N.B.: which does NOT replace necessary cold suction by
the user prior to ignition).
RESERVE WARNING
The boiler-stove is fitted with an electronic function that
detects the residual quantity of pellets in the tank.
The detection system is integrated into the electronic
board, allowing you to see how many hours and kg are left
until
pellet exhaustion, at all times. For correct system function,
it is important that the following procedure is followed du-
ring the first ignition (by the Dealer).
This provides a reference indicator.
Greater precision is obtained by regularly zeroing the sy-
stem before filling it again. Edilkamin does not accept any
responsibility for differences from what is indicated (which
may be due to external factors).
Pellet reserve system
Before enabling the system, you need to load a sack of
pellets into the tank and use the stove until the loaded
fuel has run out. This allows for a short system road test.
After this, the tank can be filled completely and the stove
started up.
When running, at the time at which a whole 15 kg sack
of pellets can be loaded, the display will show the word
“Reserve” flashing.
At this point, after having poured in a sack of pellets, you
need to ‘inform’ the memory that you have loaded 15 kg.
To do so, proceed as follows:
1. press the “M” key (for approximately 3-4 seconds) until
the word “LANGUAGE” appears.
2. press the “+” key until the word “Reserve pellet” appe-
ars.
3. press the “M” key until the following screen appears,
then use the “+” key to take the figure (*) to the value
equal to the Kg of pellets loaded (15 kg in the above exam-
ple).
4. press the “M” key to confirm
5. press the key to exit.
After having completed the above procedure, after having
consumed the 15 kg, the wording “Reserve” will appear
flashing at intervals.
The operation can then be repeated, proceeding from
point 1 to point 5, every time you wish to load pellets (op-
tional).
EMERGENCY BUTTON
If the radio remote control device does not work, you can
carry out the basic functions by means of a red emergency
button positioned on the back of the stove (see Fig. 1).
Push this button once or more times to activate the requi-
red function:
1. BOILER-STOVE OFF
by pressing the red button for 2 seconds this turns on.
2. BOILER-STOVE ON
by pressing the red button for 2 seconds this turns off.
3. BOILER-STOVE ON
manual mode, by pressing the red button, you go from P1
to P3.
4. BOILER-STOVE ON
If the stove is set in power mode, press it quickly to change
the SET output, increa¬sing it cyclically from 50 to 80°C; if
se¬t in “comfort clima”, the desired environmental tempe-
rature can be increased cyclically from 10 to 30°C
Kg remaining in tank Kg loaded
fig. 1
emergency button
USER INSTRUCTIONS
USER
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Daisy at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Daisy in the language / languages: English as an attachment in your email.

The manual is 5.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin Daisy

Edilkamin Daisy Usermanual and installation guide - German - 28 pages

Edilkamin Daisy Usermanual and installation guide - Dutch - 28 pages

Edilkamin Daisy Usermanual and installation guide - French, Italian - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info