810884
22
Zoom out
Zoom in
Previous page
1/36
Next page
22
ENGLISH
USER INSTRUCTIONS
ENERGY SAVING
If the remote control is not used for 20”, the display
turns off to save energy. The display turns black
without text. This condition refers solely to the remote
itself, and not to the boiler.
To turn the display back on, press the button
REMOTE CONTROL POWER
Open the back of the remote and insert the batter-
ies matching up the poles.
DO NOT PRESS THE BUTTON
REPEATEDLY; in manual mode, this
turns the product on and off
Synchronisation with automatic search on
activation
when you put the batteries into the radio control a radio
channel search phase will start up automatically, and
it will subsequently connect to the product detected.
So that this occurs correctly, make sure to switch the
product on before inserting the batteries in the radio
control, and stay in the vicinity of the antenna in order
to achieve radio coverage with certainty.
REMOTE CONTROL
Characteristics:
RF transceiver module, frequency 2,4
GHz - Powered by three AAA 1.5 V batteries rated at
least 1200 mAh.
Button Action
+ to increase
- to decrease
A to select the function
M to display the command and program-
ming menu
to turn on/off and switch between active
and energy saving remote control modes
Fig.11 - icon flashing: remote control searching for network
- icon fixed: remote control with connection enabled
flat battery (3 mini alkaline batteries type AAA)
keypad locked (press “A” and “M” in parallel for a few se-
conds to lock or unlock the keypad)
programming enabled
alphanumeric display consisting of 16 figures arranged in
two lines of 8 figures
- icon flashing: boiler-stove turning on
- icon fixed: boiler-stove working
It is possible to launch an automatic search for a
product manually, simply carry out the following
operations after having already put the batteries into
the radio control:
- Approach the device and make sure that it is
connected to the mains electricity.
- With the display switched off (standby) hold the 0/I
key down for 10”.
- After 10” a “NETWORK SEARCH” message appears
on the display, then release the o/I key, as this means
that the automatic search has been activated.
manual function (display shows power)
automatic function (display shows temperature)
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin ATLANTA UP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin ATLANTA UP in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin ATLANTA UP

Edilkamin ATLANTA UP Usermanual and installation guide - German - 36 pages

Edilkamin ATLANTA UP Usermanual and installation guide - Dutch - 36 pages

Edilkamin ATLANTA UP Usermanual and installation guide - French, Italian - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info