Manual EdgeCraft ScissorPro 500 (page 7 of 8) (English)

663877

Zoom out

Zoom in

1/8

FOR KNIFE-EDGE SCISSORS

Knife-edge scissors, designed particularly for cutting heavy fabric layers, have one or both blades

capable of cutting like a knife. Commonly, only the cutter blade of this type scissors has the knife

edge. When that is the case, and you can properly identify and sharpen that blade, sharpening the

other (anvil) blade is optional or even unnecessary. Only the knife-edge scissors blade is sharpened

by this special procedure. If you elect to sharpen the anvil blade, use the standard sharpening

procedure described above. Do not confuse these blades.

Proceed as follows:

a. Insert the Knife-Edge Scissors Accessory to the FINE Stage.

b. Press switch to “ON”.

c. Using the general procedure, pull the blade through the slot two (2) times.

- If a burr is felt along the entire back of the blade, sharpening is complete. Then clean the

scissors as described above.

- If no burr exists, make 2-3 additional stroke. If a burr still has not developed, then this is not

a knife-edge blade.

d. Remove the Knife-Edge Scissors Accessory and proceed to sharpen this blade as with

standard scissors.

e. Never store the ScissorPro

with the Knife-Edge Scissors Accessory positioned in the

Magne-Flex

™

guide. Always remove and store the accessory in a safe place when not in use.

SUGGESTIONS

Your ScissorPro

Diamond Hone

Scissors Sharpener Model 500 is designed to produce scissor

edges that are like new, quickly and easily. To ensure you get the very best scissor edges every

time, we suggest:

1. Loosen your grip on the scissors and use your thumb to advance the blade gently against the

rotating disk. Never apply excessive pressure when the blade is against the diamond disk.

2. Make sure the loose blade does not interfere with alignment of the blade being sharpened.

3. Pull the blade through the sharpening slots with an even and continuous motion. Do not stop

the motion. Be sure to make fast pulls after sharpening in each stage. This minimizes the burr.

4. On each stroke, start at the pivot and pull the scissors handle as necessary to maintain the blade

in contact with the diamond disk as the curved section of the blade is pulled through the slot.

5. It is essential to learn how to feel for the burr. This is the best indication sharpening in a given

stage is complete. Make certain the burr has formed along the entire blade… from pivot to tip.

Figure 9. Coarse Stage. Figure 8. Start with the “Fine” Honing Stage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of EdgeCraft ScissorPro 500 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

EdgeCraft ScissorPro 500 Manual

Product: