Manual EdgeCraft Chef-s Choice Trizor XV - EdgeSelect 15 (page 14 of 16) (English)

663873

Zoom out

Zoom in

1/16

SUGGESTIONS

1. Always clean all food, fat and foreign materials from the blade surfaces before sharpening

or resharpening. If badly soiled, use detergent and water to clean.

2. Some contemporary Asian knives and Granton type blades are dimpled and some contem-

porary and traditional Asian blades are made of layered Damascus steel. All of these should

be sharpened accordingly to these instructions depending solely on whether the knife style

is contemporary (two facets) or a traditional single facet Asian blade.

3. Always pull the blades at the recommended speed and at a constant rate over length of

blade. Never interrupt or stop the motion of the blade when in contact with abrasive disks.

4. Carefully follow the detailed procedures for each type blade for best results and to extend

the useful life of your knives. The sharpening sequence is especially important with the

single sided traditional Asian blades.

5. The edge of the knife blade, while sharpening, should remain in contact with the abrasive

disks as the knife is withdrawn from the guiding slot. To sharpen the blade near the tip of a

curved blade, lift the handle up slightly as you approach the tip of the blade but just enough

so that the edge as it is being sharpened maintains audible contact with the honing or

stropping disk.

Figure 14. If your blade has a signiﬁcant choil it may

be helpful to place our ﬁnger behind it as shown

when sharpening.

Figure 15. Place your index ﬁnger as shown behind the

choil as the knife is inserted into the sharpening slot

(see Suggestion 8.)

Figure 16. Removing cover under base to clean out

metal dust. (See Normal Maintenance section)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of EdgeCraft Chef-s Choice Trizor XV - EdgeSelect 15 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

EdgeCraft Chef-s Choice Trizor XV - EdgeSelect 15 Manual

Product: