Manual EdgeCraft Chef-s Choice Trizor XV - EdgeSelect 15 (page 13 of 16) (English)

663873

Zoom out

Zoom in

1/16

Serrated blades of all types can be sharpened in the Chef’sChoice

Model 15. However, use

only Stage 3 (Figure 12) which will sharpen the teeth of the serrations and develop microblades

along the edge of these teeth. Generally ﬁve (5) to ten (10) pairs of alternating pulls in Stage 3

will be adequate. If the knife is very dull more pulls will be needed. If the knife edge has been

severely damaged thru use make one fast pull (2-3 seconds for an 8” blade) in each of the right

and left slots of Stage 2, then make a series of pulls in Stage 3, alternating right and left slots.

Excessive use of Stage 2 will remove more metal along the edge then is necessary in order to

sharpen the teeth.

Because serrated blades are saw-like structures, the edges will never appear to be as “sharp”

as the edge on a straight edge knife. However, their tooth-like structure can be helpful—for ex-

ample to break the skin on hard crusty foods and penetrate other materials such as cardboard.

DRESSING OF STROPPING/POLISHING DISKS – STAGE 3

The Model 15 is equipped with a built-in system to manually clean/dress the stropping/polishing

disks in Stage 3. In the event these disks become glazed with grease, food or sharpening debris,

they can be cleaned and reshaped by actuating the manual lever on the rear of the sharpener.

This lever is located within a recess as shown in Figure 13 on the lower left corner as you face

the rear of the Sharpener. To actuate the cleaning/dressing tool, make sure the power is “ON”

and simply press the small lever in the recess to the right, hold about 3-4 seconds and then

press to the left and repeat for 3-4 seconds. When the lever is moved in one direction, the dress-

ing tool cleans and reshapes the active surface of one stropping/polishing disk. By moving the

lever in the opposite direction you clean the other disk.

Use this clean/dress mechanism only if the Stage 3 white disks are seriously darkened and

when Stage 3 no longer appears to be stropping/polishing well. Using this tool removes material

from the surface of the Stage 3 disks and hence, if used excessively, it will unnecessarily remove

too much of the abrasive surface – wearing the disks out prematurely. If that should occur,

factory replacement of the disks will become necessary. If you clean your knives regularly before

sharpening you may need to clean or dress the Stage 3 disks less than once a year.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of EdgeCraft Chef-s Choice Trizor XV - EdgeSelect 15 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

EdgeCraft Chef-s Choice Trizor XV - EdgeSelect 15 Manual

Product: