663876
10
Zoom out
Zoom in
Previous page
1/12
Next page
10
DRESSING THE STAGE 2 HONING WHEELS
If the Stage 2 honing wheels appear to be “glazing over” due to grease or other reasons,
or if you believe these wheels are less aggressive, you can clean them with the diamond
dresser supplied with your Model 2000 sharpener. This will restore the wheels to “like
new” condition. To dress the wheels, turn on the sharpener and insert and pull through
the dressing plate as shown in Figure 9. Insert the dresser between the plastic spring
and against the knife guide - just as you would insert a short knife for sharpening -
to make contact with the honing wheel and pull dresser plate through like a knife, pull
twice through the right and left slots as shown in Figure 9. Pull through in 2-3 seconds.
Remove plate when the process is completed.
HOW TO GET THE MOST OUT OF YOUR
Chef’sChoice
®
Model 2000
A. There is no maintenance required other than to clean the Sharpening Module periodically by
putting it in the sink or dishwasher. It is unnecessary to clean this module simply because
the honing wheels darken - that is normal. The wheels are self cleaning (through mild
ablation) unless they become covered with fat and grease. The need for cleaning can be
minimized by wiping your knives before and after sharpening as described in this manual.
Do not immerse the motor-drive unit in water. Clean it only with a damp cloth. Periodically
shake out the metal dust under the sharpening wheel as described under “cleaning...”
B. We suggest you locate the Model 2000 in a convenient place in your work area for
rapid resharpening. A few quick passes through Stage 2 will restore your knife edge to
razor sharpness.
C. Heavy cleavers (such as the ones made in Germany, France, etc.) can be sharpened on the
Model 2000. However, because most of these cleavers are manufactured with an extremely
blunt edge, it will require many pulls through Stage 1 to create the first bevel. Once
sharpened, however, the cleaver will resharpen rapidly. Asian cleavers are thinner and
sharpen quickly on the Model 2000.
Figure 9. Dressing Stage 2 Honing Wheel.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EdgeCraft Chef-s Choice - Commercial 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EdgeCraft Chef-s Choice - Commercial 2000 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info