706110

Eden World Tour Pro Series Manual

8
Zoom out
Zoom in
Previous page
1/51
Next page
14 | HI FIDELITY FOR LOW FREQUENCY
EDEN
| WTP SERIES |
WTP600
REAR PANEL FEATURES - 10
HI FIDELITY FOR LOW FREQUENCY
| 15
EDEN
| WTP SERIES |
WTP600
REAR PANEL FEATURES - 10
13. Stereo Loop Send R: Send your right effect chain signal out from here.
14. Bridge / Stereo mode: Switch between bridge mode and stereo mode here.
15. Cycle Mode: Cycle between available speaker output settings using this switch.
16. DI Volume: Adjust the output level of the DI Signal here.
17. Pre-Send: Take your signal from before the EQ stage here.
18. Pre-Return: Return your signal before the EQ stage here.
19. Ground Lift: Use this switch to lift ground on the DI output signal here.
20. Pre/Post Select: Select where the DI output signal is taken from here.
21. DI Out: Take XLR DI output signal from here.
22. Tuner Out: Take your signal for your tuner here.
23. Stomp: Connect optional Stompware Eden footpedal here to use footswitchable features on the amplier.
24. X Over: Turn crossover circuit off or on using this switch.
25. X Over Control: Use this control to adjust the crossover point between each amplier and the Left/Right line level outputs (Bi-Amp
mode only).
World Tour Pro 600 Rear Panel Features
SPEAKER OUTPUTS: The Eden Illuminated Output System used on World Tour Pro ampliers has been designed by Eden to more
easily allow players to make the right choices with their rig selection simply use the CYCLE button on the rear of the unit to select
the cabinet array you need.
Each mode will change the illuminated color of the socket indicating the correct impedance cabinet to be used.
GREEN: indicates 4 Ohm compatibility, AMBER: indicates 8 Ohm compatibility, RED: indicates not to use this socket.
1. Amp Speaker 1 Output: Depending on selected mode connect the correct impedance cabinet here using a Speakon speaker lead here.
2. Amp Speaker 2 Output: Depending on selected mode connect the correct impedance cabinet here using a Speakon speaker lead here.
3. Output Left: Take your left signal output (post loop) to external equipment here.
4. Output Right: Take your right signal output (post loop) to external equipment here.
5. Aux Input: Connect Auxiliary input signal from your MP3 player or other device using 3.5mm jack cable here.
6. Headphones: Connect your headphones using this 3.5mm output (the headphone volume is controlled by the Master volume control on
the amplier front panel).
7. Stereo Loop Return L: Return your left effect chain signal here.
8. Stereo Loop Return R: Return your right effect chain signal here.
9. Balance Control: Use this control to balance the level of Left/Right signal in the power amp.
10. Stereo Loop Send L: Send your left effect chain signal out from here.
11. Stereo Loop Send L: Send your right effect chain signal out from here.
12. DI Volume: Adjust the output level of the DI Signal here.
13. Cycle: Use this button to switch between cabinet impedance options.
14. Pre-Send: Take your signal from before the EQ stage here.
15. Pre-Return: Return your signal before the EQ stage here.
16. Ground Lift: Use this switch to lift ground on the Di output signal here.
17. Pre/Post Select: Select where the DI output signal is taken from here.
18. DI Out: Take XLR DI output signal from here.
19. Tuner Out: Take your signal for your tuner here.
20. Stomp: Connect optional Stompware Eden footpedal here to use footswitchable features on the amplier.
21. X Over: Turn crossover circuit off or on using this switch.
22. X Over Control: Use this control to adjust the crossover point between the Left/Right line level outputs.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eden World Tour Pro Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eden World Tour Pro Series in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info