706110

Eden World Tour Pro Series Manual

7
Zoom out
Zoom in
Previous page
1/51
Next page
HI FIDELITY FOR LOW FREQUENCY
| 13
EDEN
| WTP SERIES |
WTP900
REAR PANEL FEATURES - 9
12 | HI FIDELITY FOR LOW FREQUENCY
EDEN
| WTP SERIES |
REAR PANEL FEATURES - 8
OFF: When the indicator is off you are not clipping the power stage of the amplier.
AMBER: If the indicator illuminates amber this means you have clipped the input stage of the amplier briey but not for a
prolonged period of time. If the indicator operates only in the amber stage you are getting the maximum from the input stage of
the amplier without causing undesirable clipping to your sound.
RED: When the indicator illuminates red it will stay on for at least 1 second or continually to indicate clipping of the power
amplier. If the indicator ashes red this means that you are using the amplier outside of its correct limits and the amplier is
overheating this will cause the amplier to go into a safe mode reducing the chance of long term damage to the amplier by
increasing the cooling of the unit and lowering the output volume of the amplier.
26. Master Volume: This adjusts the output volume of the amplier. Use this control in conjunction with the output clip indicators (on
powered units only) to achieve the best performance from your amplier.
27. Illuminated Logo: Logo illuminates when amplier is switched on.
28. OFF / ON switch: Turn your amplier off or on using this switch.
29. Cooling Vent: Provides ventilation for the units cooling system. NEVER OBSTRUCT OR MODIFY THIS OR ANY OTHER VENT ON
YOUR UNIT.
REAR PANEL FEATURES
(For WTP900, WTP600 and WTPre)
Features will be the same for each model except where the functionality is changed due to the absence of one or more power amplifiers
in the product.
Depending on the model you own your World Tour Pro series product may be fitted with up to 3 internal fans. When turning the unit on
these fans will briefly run up and then switch off again. The Fans in World Tour Pro products are only designed to activate when the unit
becomes hot. It is normal for the fans to remain off if not required by the amplifier
Cooling Vent: Provides ventilation for the units cooling system. NEVER OBSTRUCT OR MODIFY THIS OR ANY OTHER VENT ON
YOUR UNIT.
Power Input: Plug your unit in here. Please ensure your unit is of the correct voltage for your region and that you only use an Eden
supplied power cable.
World Tour Pro 900 Rear Panel Features
SPEAKER OUTPUTS: The Eden Illuminated Output System used on World Tour Pro ampliers has been designed by Eden to more
easily allow players to make the right choices with their rig selection. Because the sockets are illuminated, it allows you to simply
select the mode that suits your cabinets ensuring you get the best performance with the equipment you own.
Each mode selected switches between bridge / bi-amp and represents the correct cabinet impedance that should be used with the
associated socket, Green indicates 4ohm compatibility, Amber indicates 8ohm compatibility and red indicates that the socket should
not be used.
Bridge Series: In addition to standard modes the World Tour Pro 900 is able to run in Bridge Series Mode. When engaged the
amplier can be used in bridged mode with 2 - 4ohm cabinets.
1. Speaker Output 1: Depending on selected mode, connect the correct impedance cabinet here using a Speakon speaker lead here.
2. Speaker Output 2: Depending on selected mode, connect the correct impedance cabinet here using a Speakon speaker lead here.
3. Amp Left Speaker 2 Output: Depending on selected mode, connect the correct impedance cabinet here using a Speakon speaker lead
here.
4. Amp Right Speaker 2 Output: Depending on selected mode, connect the correct impedance cabinet here using a Speakon speaker lead
here.
5. Output Left: Take your left signal output (post loop) to external equipment here.
6. Output Right: Take your right signal output (post loop) to external equipment here.
7. Aux Input: Connect Auxiliary input signal from your MP3 player or other device using 3.5mm jack cable here.
8. Headphones: Connect your headphones using this 3.5mm output (the headphone volume is controlled by the Master Volume control on
the amplier front panel).
9. Stereo Loop Return L: Return your left effect chain signal here.
10. Stereo Loop Return R: Return your right effect chain signal here.
11. Balance Control: Use this control to balance the level between the two ampliers.
12. Stereo Loop Send L: Send your left effect chain signal out from here.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eden World Tour Pro Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eden World Tour Pro Series in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info