668110
17
Zoom out
Zoom in
Previous page
1/32
Next page
7.Automatically Charging
?
?
When it finishes cleaning or there is low battery, it would seek charger
in same route as automatic cleaning.To make it easy for robot to
search for charging block, you need to put the block back to the wall
and make sure there is no obstacle within 1.5 meters ahead of the
infrared receiver. Check carefully whether there is strong reflector in
front of the charger, such as ground glass, smooth ceramic vase and
so on.
It takes time for robot to seek the charger. The reserve time differs from
the ground situation.
Robot can return to the charger if the ground situation is not too
complicated. Under extreme circumstance, such as, huge house and
complex layout would probably bring difficulty for robot to seek for
charger. In such case, you should help to put the robot back to charger.
Take care of the first automatic charging, if you find that the robot keeps
turning in the certain area after trying several times to seek back, you
can help to place it on the charger and look through the charging.
Under mode, main brush will stop working and robot cannot do the
cleaning.
Robot shall stay at the charger when it finishes charging and it transfer
to small currency to charge until you start operating. If you have set
appointment timing cleaning, it would go out of the charger to do
cleaning when it comes to appointment time.
15
8. Appointment Timing
1. After power is on, keep press for
around 3 seconds then on LCD is light
and the number with time setting is
flashing.
2. Set hour and minute via and , each
time press will increase one hour or
minute. While decrease one hour and
minute for .
3. When you finish setting time, press
again, and then go to second time setting.
Set current time
as 12:07 pm,time
display on LCD
should be:
For example:
Appointment Time Setting
Selection scope: hour is between 0 and 23, minute is
between 0-59.
Under normal circumstance, time display on LCD shows
current time.
Tips:
First time setting
mode
mode
strait room
strait room
Enj o y Sma r ter L i fe!
Downloaded From Vacuum-Manual.com Manuals
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecovacs Deebot D58 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecovacs Deebot D58 in the language / languages: English as an attachment in your email.

The manual is 4,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info