668110
30
Zoom out
Zoom in
Previous page
1/32
Next page
10 Why does robot fail to start cleaning on side brush can remove dust along bottom
appointment time? edge efficiently; there would be dust beyond
robot in the tiny area formed by two walls
Answer: a.Confirm whether there is much
which need to be removed by hand.
remaining battery. Appointment timing is not
applicable when robot is returning to charge 15. Why does the speed of robot slow down
after operating cleaning. b. Check if robot is sometimes?
under standby status.
Answer: When robot detects there is much
11. Why robot is not charging as it is put in garbage and dust on the floor, it would turn
the charger? The charging indicator does to low speed proceeding automatically.
not light as well.
16. Is there any danger to furniture and child
Answer: a. Examine whether the battery at when robot is proceeding?
the bottom is installed in place, if cover
Answer: No. There is a soft rubber buffer
screw is loose, you need to fasten it. b.
made of PPC in front of the host. It would try
Check if there is power supply for the socket.
other route once it touches furniture or child.
c. Please contact our after-sales service
17. Would robot affect pet?
when the failure is still there.
Answer: Robot makes low noise when
12. Why does not the remote control work?
operating, so there would be no shrill sound
Answer: a. The control distance is within 5
which may cause pet restless or even
meters. It would be insensitive if longer
distrust. If you keep pet at home, we suggest
distance. b. Check battery in remote control
you to notice the first time the robot
and make sure it is placed correctly. c.
operating.
Insure robot power supply is on, please get it
18. What should be noticed when cleaning
charged when you notice it shows low
the carpet?
battery on LCD. d. Use clean cloth to wipe
infrared transmitter on remote control and
Answer: Robot is not able to clean long hair
infrared receiver on robot. e. If the host is too
over 2 centimeters. Fold the banding first
close to virtual wall or charger, the signal of
when you start cleaning.
remote control will get interfered.
19. Does it matter to keep the robot at the
13. Why does not virtual wall work?
charger when not using it?
Answer: a. Insure the region blocked by
Answer: Yes. Robot will transfer to small
invisible light from virtual wall, which is the
currency to supplement charging. Please
region you do not want robot to get across.
avoid wrong operation by child.
b. The signal will get interfered if virtual wall
.
is too close to the charger. c. Check whether
the region you want is beyond the virtual
wall, we suggest you to purchase additional
virtual wall if necessary.
14. Would it be difficult for robot to clean the
corner as it is a round design?
Answer: Robot can detect wall by itself. It is
able to clean along the edge of wall under
automatic and border cleaning mode. Its
.
20 Is there any danger to wrongly touch the
docking electrode film between the host
and charger?
Answer:No.The two electrodes of charger is
of no voltage under output mode(when there
is no power supply); it's maximum voltage is
24V which is safe one under input
mode(when it is charging)
28
Downloaded From Vacuum-Manual.com Manuals
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecovacs Deebot D58 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecovacs Deebot D58 in the language / languages: English as an attachment in your email.

The manual is 4,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info