388952
4
Zoom out
Zoom in
Previous page
1/22
Next page
04 Ferm
GB
Ferm 41
ROTARY HAMMER DRILL
The numbers in the following text correspond
with the pictures at page 2 - 3.
Read this manual carefully, before
using the machine. Ensure that you
know how
the machine works, and how it should be opera-
ted. Maintain the machine in accordance with the
instructions, and make certain that the machine
functions correctly
. Store this manual and other
enclosed documentation with the machine.
Intended use
The rotary hammer drill is intended to be used for
drilling holes in material like stone, concrete and
similar materials. With suitable drill bits the
machine also can be used to drill holes in wood
or metal.
The machine can be used as a demoli-
tion hammer in combination with the appropriate
chisels. All other purposes are explicitly exclu-
ded.
Please inspect the machine and accessories for
transit damage.
Contents
1. Machine information
2. Safety
instructions
3. Operating
4. Maintenance
1. MACHINE INFORMATION
Technical specifications
Product information
Fig. A
1. Rotary stop selection lever
2. On-off Switch
3. Main handle
4. Hammer stop selection lever
5. Carbon brush cap
6. Electric cord
7. Auxiliary handle
8. Depth gauge
9. Dust cap
10.Drill
11.Locking sleeve
2. SAFETY INSTRUCTIONS
In this operator's guide the following symbols are
used:
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates electrical shock hazard.
Wear ear and eye protection
Specific safety instructions
For use of this machine/tool:
Inspect the surface to be drilled for hidden elec-
trical wiring, gas pipes or other obstacles (for
example, using a metal detector).
Check the following points:
Does the appliance’s voltage correspond with
the mains power supply voltage?
Are power cords, insulation and plug in good
order: sound, not loose or damaged?
Is there a good, firm connection at the mains
socket?
Does the drill show any sign of abnormal run-
ning, overheating or excessive sparking?
Lpa 88.0 dB(A)
Lwa 101.0 dB(A)
Vibration
When chiseling 7.583+1.5 m/s
2
When hammering in concrete 12.273+1.5 m/s
2
Voltage 230 V
Frequency 50 Hz
Power rating 850 W
Rotational speed,
not loaded 750/min
Impact rate 2920/min
Max. bit diameter
Concrete Ø 28 mm
Steel Ø 13/16 mm
Wood Ø 40 mm
Weight 5.4 kg
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Economy hdm 1015 ebf 850k at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Economy hdm 1015 ebf 850k in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info