763669
8
Zoom out
Zoom in
Previous page
1/128
Next page
8
EN
mounttheange(7)usingtheangekey(8).
Mounting and removing the grinding disc

Do not use the machine without the
guard.
Mounting
● Placethemachineonatablewiththeguard
(4)facingupwards.
● Keepthespindlelockbutton(2)pressedand
removetheange(7)usingtheangekey(8).
● Mountthegrindingdisc(9).
● Keepthespindlelockbutton(2)pressedand
mounttheange(7)usingtheangekey(8).
Removing
● Placethemachineonatablewiththeguard
(4)facingupwards.
● Keepthespindlelockbutton(2)pressedand
removetheange(7)usingtheangekey(8).
● Removethegrindingdisc(9).
● Keepthespindlelockbutton(2)pressedand
mounttheange(7)usingtheangekey(8).
Mounting and removing the auxiliary grip

Mounting
● Tightentheauxiliarygrip(6)intooneofthe
mountingholes(13).
Removing
● Loosentheauxiliarygrip(6)fromthemounting
hole(13).
USE

● Thismachineinequippedwithasafety
switchand needs to be unlocked before
operation.
● Pressatthebottomoftheswitchtounlock
theon/offswitch.
● Slidetheon/offswitchforwards.
● Toswitchoff,depresstheon/offswitch,this
will then jump to the ‘off’ position.
● Donotputthemachinedownwhenthe
motorisstillrunning.Donotplacethemachine
onadustysurface.Dustparticlesmayenter
themechanism.
Hints for optimum use
● Clamptheworkpiece.Useaclampingdevice
for small workpieces.
● Drawalinetodenethedirectioninwhichto
guide the grinding disc.
● Holdthemachinewithbothhands.
● Switchonthemachine.
● Waituntilthemachinehasreachedfullspeed.
● Placethegrindingdiscontheworkpiece.
● Slowlymovethemachinealongthepre-drawn
line,rmlypressingthegrindingdiscagainst
the workpiece.
● Donotapplytoomuchpressureonthe
machine.Letthemachinedothework.
● Switchoffthemachineandwaitforthe
machine to come to a complete standstill
before putting the machine down.
CLEANING AND MAINTENANCE
Before cleaning and maintenance,
always switch off the machine and
remove the mains plug from the mains.
● Regularlycleanthehousingwithasoftcloth.
● Keeptheventilationslotsfreefromdustand
dirt.Ifnecessary,useasoft,moistclothto
remove dust and dirt from the ventilation slots.

Worn or damaged grinding discs must be
replaced immediately.
Only use sharp and undamaged grinding
discs.
● Toremovetheoldgrindingdisc(9),proceed
as described in the section
”Mountingandremovingthegrindingdisc”.
● Tomountthenewgrindingdisc(9),proceed
as described in the section
”Mountingandremovingthegrindingdisc”.
Carbon brushes
Ifthecarbonbrushesareworn,thecarbonbrushes
must be replaced by the customer service
department of the manufacturer or a similarly
qualiedperson.
WARRANTY
Consulttheenclosedwarrantyterms.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Economy by Ferm AGM1045 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Economy by Ferm AGM1045 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 39,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info