763669
6
Zoom out
Zoom in
Previous page
1/128
Next page
6
EN
Securely mount the guard for maximum safety.
Makesurethattheuserisprotectedfromthe
grinding disc as much as possible.
● Makesurethattheworkpieceisproperly
supportedorxed.
● Wearsafetygoggles.Wearhearingprotection.
Wearadustmask.Ifnecessary,useother
protective means, such as safety gloves,
safety shoes, etc. Risk of personal injury.
● Keepbystandersawayfromtheworkarea.
Makesurethatallpersonsintheworkareawear
protective equipment. Risk of personal injury.
● Keepthemainscableawayfromtherotating
grindingdisc.Ifthemainscabletouchesthe
rotating grinding disc, your hands or arms may
come in contact with the grinding disc.
Risk of personal injury.
● Holdthemachinebytheinsulatedgripping
surfaces where the grinding disc may contact
hiddenwiringorthemainscable.Ifthe
grinding disc contacts a ’live’ wire, the exposed
metal parts of the machine can also become
’live’. Risk of electric shock.
● Donotusethemachinewhilecarryingitat
your side. Risk of personal injury.
● Donotusethemachineonworkpiecesrequiring
a maximum grinding depth that exceeds the
maximum grinding depth of the grinding disc.
● Donotuseaccessoriesthatrequireliquid
coolants. Risk of electric shock.
● Donotusethemachinenearammable
materials.Riskofre.
● Donotworkmaterialscontainingasbestos.
Asbestos is considered carcinogenic.
● Donotworkmetalwithamagnesiumcontent
of more than 80%.
● Bewarethatthegrindingdisccontinuesto
rotate for a short period after switching off the
machine.Donotattempttobringthegrinding
disc to a standstill yourself.
● Neverputthemachinedownonatableor
a workbench before it has been switched off.
● Regularlycleantheventilationslots.
Risk of electric shock.
Kickbackisasuddenreactiontoapinched,bound
or twisted grinding disc, which causes the machine
to lift up and out of the workpiece towards the user.
Ifthegrindingdiscispinchedorboundtightlyby
the cut, the grinding disc jams and the machine is
rapidlydrivenbacktowardstheuser.Ifthegrinding
disc is twisted in the cut, the back edge of the
grinding disc can dig into the top surface of the
workpiece, which causes the grinding disc to climb
out of the cut and jump back towards the user.
Kickbackistheresultofincorrectuseofthe
machine and/or incorrect operating procedures or
conditions.Kickbackcanbeavoidedbytaking
proper precautions:
● Firmlyholdthemachinewithbothhands.
Position your arms to resist kickback forces.
Position your body to either side of the grinding
disc, but not in line with the grinding disc.
Kickbackcancausethegrindingdisctojump
backwards.Ifproperprecautionsaretaken,
kickback forces can be controlled by the user.
● Beextracarefulwhenusingthemachineon
corners,sharpedges,etc.Makesurethatthe
grinding disc does not become jammed.
Risk of kickback.
● Ifthegrindingdiscjamsorifyouinterruptacut
for any reason, release the on/off switch and
hold the machine motionless in the material
until the grinding disc comes to a complete
standstill. Never attempt to remove the machine
from the workpiece or pull the machine
backward while the grinding disc is in motion.
Risk of kickback.
● Donotusebluntordamagedgrindingdiscs.
Unsharpened or incorrectly mounted grinding
discs produce narrow cuts, which causes
excessive friction and kickback and increases
the risk of the grinding discs becoming jammed.
● Donotusetoothedsawblades.Donotuse
woodcarving blades for saw chains.
Risk of personal injury.
Electrical safety
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate.
● Donotusethemachineifthemainscableor
the mains plug is damaged.
● Onlyuseextensioncablesthataresuitablefor
the power rating of the machine with a minimum
thickness of 1.5 mm
2
.Ifyouuseaextension
cable reel, always fully unroll the cable.
Mains plug replacement (UK only)
Ifthemoulded3-pinplugattachedtotheunitis
damaged and needs replacing, it is important that
it is correctly destroyed and replaced by an
approvedBS1363/5Afusedplugandthatthe
following wiring instructions are followed.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Economy by Ferm AGM1045 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Economy by Ferm AGM1045 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 39,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info