742239

Ecoforest SUPER INSERT Manual

46
Zoom out
Zoom in
Previous page
1/140
Next page
45
It is recommendable to calculate the frequency with which you clean the outlet cleaning considering the hours
of operation, thus avoiding ash saturation.
Once you clean the walls of the stove, you must be sure that the cleaning outlet is securely closed, since the
proper operation of the stove depends on this cleaning.
5.6. Cleaning of the gas outlet circuit. Always with the boiler disconnected. (Very important).
For an optimal cleaning of the extractor’s collector, it is recommended to dismantle the extractor itself in order
to have full access to this zone for a better cleaning. To do this, remove the screws that secure the edges of
the rear grille and remove the boiler, o or pull out the boiler from its embedded space if it is a Super Insert
model, thus getting full access to the extractor. Once the extractor is dismantled, clean it with a dry brush and
be careful with the turbine and structure.
When reassembling the exhaust it is COMPULSORY to replace the exhaust joint with a new one as you run the
risk of gas entering in our home.
Drawing 20
5.7. Dismantling and cleaning of gas outlet pipes.
When mounting the gas outlet pipeline, make sure it is well assembled, preferably sealed with silicone. If the
pipe has sealing joints, you must verify its good condition and replace it if necessary.
5.8. Lubrication of the screw and spring of the gas security valve. It is located to the left of the ash box. To access
and lubricate the anti-explosion valve, open the boiler doors, remove the ash box and push the round plate
outwards, thus allowing lubrication of the valve screw and spring.
q
Lubrication point.
Drawing 21
5.9. Empty the hopper to take remaining pellets out to avoid pellets absorb humidity.
5.10. Review the fireplace door joints.
Review in detail any imperfections which may cause an air inlet. Replace them if necessary.
q
Exhaust circuit extractor
.
w
Ceramic fiber joint (replace).
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecoforest SUPER INSERT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecoforest SUPER INSERT in the language / languages: English, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 12,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info