815612

Ecoforest ecoGEO series Manual

48
Zoom out
Zoom in
Previous page
1/352
Next page
User manual
48
EN
3.11. HEATING Menu
Heating
This enables the HEATING mode and adjusts the heating cut-off temperature. The
HEATING mode is never activated for temperatures over the cut-off setpoint.
The icon indicates that there is a time schedule activated in the HEATING mode.
Heating buffer
This displays the setpoint temperature of the buffer storage tank and allows
adjustments to be made to the start-up temperature differential.
Heating units
This can be used to adjust the heating target outlet temperatures programmed by the
technical service. Each ramp increases or decreases the outlet temperature by 2ºC.
Interior terminals
Used to show and adjust the inside environment temperature setpoint (Tcons) and the
comfort temperature differential (DTc) of the terminals of each outlet unit.
Note: This configuration is associated with the heating and cooling services. If it is modified
for the heating service, it will automatically change for the cooling service and vice versa.
AUTO terminal control
Used to enable the automatic control of indoor terminals by bus (TH-Tune / THt).
Used to set the minimum (Tmin) and maximum (Tmax) indoor ambient temperature
values, between which the indoor terminals setpoints will pivot in the different
operating modes.
Note: When this option is activated, the indoor terminals perform automatic setpoint
changes depending on whether or not any of the energy efficiency functions are activated.
When the electrical surplus management or forced consumption functions (SG4) are
activated, the terminals automatically change to the most demanding room temperature
setpoint in accordance with the operating mode (Tmax for heating / Tmin for cooling).
When neither of these functions is activated, the indoor terminals change automatically to
the least demanding setpoint. Once the setpoint has been changed automatically, it can be
modified by directly adjusting each of the indoor terminals. The new setpoint will remain
in effect until such time as the conditions for a new automatic setpoint change are met.
Note: This configuration is associated with the heating and cooling services. If it is modified
for the heating service, it will automatically change for the cooling service and vice versa.
4:5 User menu /8
On/Off
Schedule
Heating
3/8 Heating
Enable:
StopT:

Heating buffer
SetT:
5
DTstart: 5
Heating groups
-  + -  +
DG:
SG:
5
SG3:
SG4:
Room terminals
Tset
DTc
Z:  
Z:  
Z3:  
Z4:  
Z5:  
Term ontrol AUTO
Enable:
Tmn
Tmx
Z:  
Z:  3
Z3:  4
Z4:  3
Z5:  3
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecoforest ecoGEO series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecoforest ecoGEO series in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 9.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info