815593

Ecoforest Cantina Super Manual

66
Zoom out
Zoom in
Previous page
1/228
Next page
65
A039
Burning pot cleaning failure.
Sensors do not detect opening and closing of the
burning pot’s lid after 3 cleaning attempts.
• Doors or ash drawer cover badly closed.
• Burn pot base open or not properly closed.
• Sensor damaged.
• Wiring or connector disconnected or loose.
• Periphery damaged.
• Engine damaged.
A040
A045
MODBUS RS485 communication error between
the CPU and its environment.
• Disconnected cable.
• Broken cable, replace with a new one.
A041
Zoning Periphery 2
• Zoning Failure 2.
• MODBUS cable failure
A042
Zoning periphery 3
• Zoning fault 3.
• MODBUS cable failure
A051
Pneumatic silo control without pellets.
• External silo has no pellets.
• Pipeline.
• Open pneumatic silo lid.
A052
A053
Hopper silo 1 sensor without pellet.
• Sensor defective or badly calibrated.
• Without pellet.
• Conveyor screw of external silo stuck.
A054
Silo control 3 sensors.
• One of the sensors damaged.
• Without pellet.
A055
Burning pot cleaning.
• Burning pot performing configured cleaning.
• Burning pot cleaning carried out and awaiting
demand.
A099
Lack of pellets, impossible to reach the minimum
temperature for gas exhaustion (80 °C).
• Filling the hopper.
• Stopped gear motor.
• The safety thermostat has tripped.
A101
Maximun flow temperature in zone 1.
• Air in the circuit.
• Little dissipation of the energy generated.
• Too heavily used.
• Shortcut in NTC.
A102
Maximun flow temperature in zone 2.
A103
Maximun flow temperature in zone 3.
A104
Minimum flow temperature in zone 1.
• Installation of boiler badly measured.
• Boiler working to low levels of power.
• Disconnected NTC.
• NTC badly placed.
A105
Minimum flow temperature in zone 2.
A106
Minimum flow temperature in zone 3.
A107
Maximun room temperature in zone 1.
• Too much temperature in the room.
• Disabling the room sensor.
• Increasing operating temperature.
A108
Maximun room temperature in zone 2.
A109
Maximun room temperature in zone 3.
A110
Minimum room temperature in zone 1.
• Low temperature in the room.
• Disabling the room sensor.
• Lowering operating temperature.
A111
Minimum room temperature in zone 2.
A112
Minimum room temperature in zone 3.
A120
MODBUS RS485 communication error between
the CPU and its environment. Zone 1
• Disconnected cable.
• Broken cable, replace with a new one.
A121
THT1 does not communicate.
• Review configuration.
• Check zone THT connections.
A122
THT2 does not communicate.
A123
THT3 does not communicate.
6.1. RESET ALARM.
The switching off process triggered by an alarm depends on the machine’s previous state, its configuration and
on a series of external factors. Once the alarm process has ended, the unit can be rebooted after having revised the
alarm table and taken the necessary measures.
Drawing 59
… 66 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecoforest Cantina Super at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecoforest Cantina Super in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 19.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ecoforest Cantina Super

Ecoforest Cantina Super Installation Guide - English, French, Italian, Portuguese, Spanish - 136 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info