654249
31
Zoom out
Zoom in
Previous page
1/62
Next page
ENGLISH
Translation of the original German user manual 30
6.1.1 Machine in use with water tank
1. Fill the water tank, if necessary.
2. Now turn the machine on (the metal switch in the upper position and the left switch behind the drip tray
in position ‘0’).
3. To use the steam function, press the right switch behind the drip tray in position ‘I’.
4. Please wait until the desired coffee-, i.e. steam temperature, has been reached (value indicated on the
PID-display). The machine is ready for steam/ hot water dispensing as soon as the PID display indicates
the pre-set nominal temperature of 123°C (factory setting) or the boiler pressure gauge indicates a value
of about 1.0-1.5 bars. In general, the machine will be heated up in about 15 minutes, depending on the
ambient temperature.
5. The machine is now ready for use.
6.1.2 Machine in use with direct water connection
1. Please make sure that there is always water pressure in the water connection line (indicated on the
pump pressure gauge).
2. Now turn the machine on (the metal switch in the upper position and the left switch behind the drip tray
in position ‘I’).
3. Continue as described in chapter 6.1.1
It is recommended to leave the portafilter in the brew group, keeping it warm for optimum
temperature for coffee preparation.
If you would like to plumb your machine, installation through a qualified service technician
is required.
6.2 PID-display functions
6.2.1 Programming the temperature of both boilers
During normal operations, the temperatures of the coffee boiler (t1, period in the 1st position) and the steam
boiler (t2, period in the 2st position) are indicated alternately.
The controls are factory pre-set so that both boilers are heated consecutively, whereby the coffee boiler (t1)
has priority. This means that the steam boiler (t2) is activated only after the programmed temperature of the
coffee boiler has been reached.
Please take the following steps to program the temperature of both boilers:
1. Switch the machine on in order to activate both boilers (switch in
position “2”). The temperature of either boiler is of no importance
in programming. Both heaters are inactive during programming.
2. Press + and at the same time until ‘t1’ (coffee boiler) appears
on the display,
3. Press + in order to progress to the submenu of ‘t1’ and to change
the temperature value. The nominal temperature value is displayed.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm Synchronika at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm Synchronika in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ecm Synchronika

Ecm Synchronika User Manual - English, German - 33 pages

Ecm Synchronika User Manual - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info