654249
29
Zoom out
Zoom in
Previous page
1/62
Next page
ENGLISH
Translation of the original German user manual 28
Image 5: Machine bottom
4.4 Manual adjustment of the brewing pressure
The brewing pressure of the machine can be adjusted manually, without opening the machine, through an
adjusting screw (see image 5 chapter 4.3) at the bottom of the machine. This adjustment must be carried
out by expert specialists.
5. FIRST USE
Read the instruction manual carefully prior to operating the machine.
Prior to starting the machine, check if:
the steam and hot water valves are closed.
the machine is switched off. (Power switch in the vertical position.)
the power cord is disconnected.
the drip tray is inserted accurately.
the machine is placed on a water resistant surface.
Now you can start up your machine:
5.1 Machine in use with water tank
(steam/ hot water boiler activated)
1. Please make sure that the valve at the bottom panel of the machine and the switch behind the drip tray
are in the correct position (see images 3 and 4 chapter 4.3).
2. Open the cup warming tray. Take out the water tank and rinse it thoroughly.
3. Fill the water tank with fresh water deficient in lime, place it back into the water tank guides and close
the cup warming tray.
4. Plug the machine into an electrical outlet.
5. Turn the machine on by placing the metal switch in the upper position. The green control lamp and the
PID display will come on and a pump noise will be heard. If there is still a pump noise, the filling of the
steam/ hot water boiler is still being completed.
Fill mode
The PID-display indicates “FIL”. Now position the brew lever upwards for at least 30 seconds at a time
to fill the coffee boiler. The display indicates the time in seconds.
Move the lever back into the lower position. The “FIL” display turns off.
6. If the pump stops and the PID display turns off while the boilers are filled, you have to refill fresh water in
the water tank. If there is enough water in the water tank again, the pump starts to operate again.
7. As soon as both boilers are filled with water, the pump will become quiet. Both boilers are now being
heated in succession whereby the coffee boiler has priority.
8. The PID display will show the current temperatures of both boilers alternately (see chapter 3.3). The
machine is ready for coffee preparation as soon as the PID display indicates the pre-set nominal
temperature of 93°C (199,4 °F factory setting). The machine should have been switched on for at least
10 minutes to make sure that the brew group is sufficiently warm.It is ready for steam/ hot water
Adjustment screw brewing pressure
Drainage container
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm Synchronika at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm Synchronika in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ecm Synchronika

Ecm Synchronika User Manual - English, German - 33 pages

Ecm Synchronika User Manual - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info