654239
27
Zoom out
Zoom in
Previous page
1/62
Next page
ENGLISH
Instruction manual MECHANIKA & TECHNIKA PROFI DUE
26
2 Put the blind filter into the filter holder.
3 Put a cleaning tablet into the filter holder.
4 Place the filter holder in the housing of the group.
5 Operate the group lever. The blind filter will fill with water.
6 Let the detergent react, moving the group lever into the middle position. (Do not move it into the lower
position.)
7 Move the lever into the lower position after approx. 1 minute. This way, the fats and oils can be discharged by
the infusion cylinder.
8 Repeat points 5-7 several times, until only clear water is discharged by the infusion cylinder.
9 Rinse the filter holder and the blind filter with fresh water. Then replace it.
10 Operate the group lever for approx. 1 minute. Then move it back into the lower position.
11 Remove the filter holder and repeat point 10. After this, the brew group is ready for use.
Caution!
Beware of hot sprayings while cleaning the group.
7.3 Draining the boiler
Machine in use with water tank
1 Heat up the machine until it has reached an adequate pressure (approx. 1.25 bars).
2 Switch off the machine.
3 Open the hot water valve.
Thus, you can drain 95% of the boiler content.
Machine in use with direct water connection
1 Heat up the machine until it has reached an adequate pressure (approx. 1.25 bars).
2 Separate the machine from the water supply connection.
3 Switch off the machine.
4 Open the hot water valve.
7.4 Maintenance
(If you have any questions, please contact your specialised dealer.)
Replacing the group gasket and the shower screen (Group gasket (item no. C449900229) and shower screen (item
no. C519900103) must be changed at the same time)
1 Switch off the machine (power switch in position“0”) and disconnect the power cord.
2 Open the steam valve and release the steam. Then close it again.
3 Let the machine cool down to room temperature.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm Mechanika Profi Due at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm Mechanika Profi Due in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 4,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info