654244
28
Zoom out
Zoom in
Previous page
1/33
Next page
ΕNGLISH
Instruction manual ELEKTRONIKA II PROFI
27
9 Have the descaling liquid circulate through the group by pressing the star key.
10 Switch the machine off and empty the boiler by dispensing hot water. Then close the hot water valve again.
It is recommended to unscrew and remove the nozzle of the hot water dispenser so that no dirt
can accumulate inside the nozzle.
11 Rinse the water tank and remove lime or descaler residues.
12 Fill fresh water into the water tank.
13 Switch the machine on. Thus, the boiler is automatically filled with fresh water.
14 Refill water into the water tank.
15 Start the cleaning mode with the blind filter to remove descaler residues from the expansion valve. Then remove
the blind filter from the filter holder.
16 Press the star key for approx. 60 seconds to rinse the heat exchanger.
17 Repeat point 9 to 11 three to five times in order to rinse the boiler until clear, neutral smelling water comes out of
both the group head and the hot water release.
Important!
These descaling instructions are meant for prophylactic descaling only. Please do not descale the
machine if it is already calcified. While descaling the machine, the lime residues can plug several
components, like valves, gauges etc., causing damage to your espresso coffee machine. In this case,
please contact your specialised dealer. It is probable that a professional descaling has to be carried out
which requires the disassembling of boiler and tubing.
Damage to persons or to the material, caused by calcification in and on your machine, is not subject to
the manufacturer’s liability.
In this case the warranty expires as well. Machines will only be accepted for repair after having
received technical advice and with written acknowledgement.
Please do not enclose loose parts e. g. filter holders or drip tray when sending the machine in for
repairs / maintenance.
7.4 Maintenance
Replacing the group gasket
Replace group gasket and shower plate at the same time.
1 Switch the machine off (power switch in lower position) and disconnect the power cord.
2 Let the machine cool down to ambient temperature.
3 Follow the steps as indicated below:
1
Brew group in the beginning.
2
Use a flat screwdriver to pry out the shower
plate and the group gasket.
3
The shower plate and the gasket are now
nearly removed.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm Elektronika II Profi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm Elektronika II Profi in the language / languages: English, German as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info