654244

Ecm Elektronika II Profi Manual

27
Zoom out
Zoom in
Previous page
1/33
Next page
ΕNGLISH
Instruction manual ELEKTRONIKA II PROFI
26
Cleaning as necessary:
Clean the steam and hot water valve after every use.
Clean the body when the machine is switched off and cold.
Use a soft and damp cloth for cleaning.
Never use abrasive or chloric detergents!
Empty the water drip tray regularly and do not wait until it is full.
7.2 Automatic group cleaning and degreasing
A brew group cleaner (in powder or tablet form) is available at your specialised dealer. With this detergent, you can
clean and degrease the group very easily. The cleaning is carried out using the blind filter included with delivery. The
group cleaning should be carried out after about 150 cups brewed.
1 Heat up the machine.
2 Put the blind filter into the filter holder.
3 Fill the blind filter with ½ sachet of group cleaning powder or insert one tablet.
4 Clamp the filter holder into the brew group.
5 Start the brew group cleaning mode by keeping the star key pressed and press button 1 (espresso).
A running light appears on the control panel. Please wait until the running light has stopped and all buttons of
the control panel light up again
6 Remove the filter holder and rinse it. Then clamp it into the brew group again.
7 Press the star key shortly to make sure that the degreasing residues in the brew group are completely removed.
Caution!
Beware of hot water splashes while cleaning the group.
7.3 Prophilactic descaling (for water tank machines)
A regular descaling of the machine is recommended in order to avoid strong calcification and expensive repairs.
While descaling, always take into account the hardness degree of the water. It is very important to use a sparing
descaler which does not affect the metal. You can purchase a descaler at your specialised dealer (in powder or tablet
form) which is perfectly suited for your machine. Just fill the water tank with fresh water and dissolve the descaler in
it. Then proceed as follows:
1 Heat up the machine until the operating pressure has been reached (1.0-1.2 bar).
2 Switch the machine off.
3 Empty the boiler by operating the hot water dispenser. Then close the hot water dispenser again.
4 Mix the descaler with water according to the instructions and put it into the water tank.
5 Switch the machine on. Thus, the empty boiler is automatically filled with descaling liquid.
6 Press the star key and wait until liquid is released from the group. Thus, the heat exchanger is filled with descaler
liquid. Press the star key again.
7 Clamp the filter holder with the blind filter into the group and press the star key. Dispense liquid for approx. 20
seconds and press the star key again to stop dispensing. Thus, the expansion valve is descaled. Repeat this
process 3 times.
8 After this procedure let the descaler work for approx. ½ hour.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm Elektronika II Profi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm Elektronika II Profi in the language / languages: English, German as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info