654250
22
Zoom out
Zoom in
Previous page
1/30
Next page
ENGLISH
Bedienungsanleitung / Instruction manual CONTROVENTO
21
4.2 Electrical connection
Make sure that the local main voltage supply corresponds to the information given on the type
plate on the front panel of the espresso machine.
Plug the machine into a grounded socket only and do not leave it unattended.
Do not roll or bend the power cord.
Do not use an extension cord/ do not use a multiple socket.
5 FIRST USE
5.1 First use
Read the instruction manual carefully prior to operating the machine.
Prior to starting the machine, check if:
the steam and hot water valves are closed.
the machine is switched off. (Power switch in the vertical position.)
the power cord is disconnected.
the drip tray is inserted accurately.
Now you can start up your machine:
Machine in use with water tank
1 Lift the cup warming tray.
2 Take out the water tank and rinse it thoroughly.
3 Fill the water tank with fresh water deficient in lime, place it back into the water tank guides and replace the cup
warming tray.
4 Plug the machine into an electrical outlet. Position the brew lever upwards. Turn the on/off switch to position
‘1’ in order to heat up the coffee boiler. Now the green control lamp will come on. To engage the steam boiler,
turn the switch to position ‘2’. Now the orange control lamp will light up as well.
5 As soon as water is released through the brew group, position the brew lever back downward. The coffee boiler
is now filled with water.
Since much water is used for the initial filling of the boilers, the water tank has to then be refilled with water.
6 As soon as the steam boiler is filled with water, the pump will turn silent and the PID-display will show the
current temperature of both boilers (reg. item 3.2). When the fresh water in the water tank drops to a certain
level, the machine shuts down and the PID-display turns off. You now have to refill fresh water. The machine
automatically heats up again. Because a large amount of water is required for the first filling of the boiler, the
water tank has to be refilled with fresh water.
7 Please wait until the boiler pressure gauge indicates a value of about 1.0 – 1.25 bars.
8 Manual boiler venting is not necessary because the Controvento contains a professional Anti-Vacuum valve,
which vents the boiler during the heat-up phase. This venting procedure is done by way of the brew group,
directly into the drip tray. Caution, steam forms!
9 The machine is now operational. To always have pre-heated cups, place them on the cup warming tray.
The CONTROVENTO has a fuse to prevent the machine from overfilling.
It is possible that the machine does not heat up when using it for the first time or when dispensing
large quantities of water through the hot water valve. In this case please switch the machine off and
on again.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm Controvento at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm Controvento in the language / languages: English, German as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info