669390
24
Zoom out
Zoom in
Previous page
1/34
Next page
ENGLISH
Instruction manual CLASSIKA II / CLASSIKA PID
23
It is recommended to leave the portafilter in the brew group, keeping it warm for optimum coffee
dispension temperature.
6.2 Manual adjustment of the brewing pressure
You can individually adjust and change the brewing pressure by turning the adjusting screw, choosing a value
between approx. 8.5 and 12 bar.
To adjust the brewing pressure, proceed as follows:
1 Remove the cup warmer.
2 Place the portafilter with the blind filter (filter without holes) into the brew group
3 Operate the group lever and read the pump pressure gauge.
4 Choose the desired brewing pressure by turning the adjusting screw with a coin or a flat screwdriver. You can
reduce the brewing pressure by turning the screw anti-clockwise and increase it by turning it clockwise.
5 You can read the programmed pump pressure on the pump pressure gauge.
6 Place the group lever back into the lower position to stop brewing. Unclamp the portafilter and replace the blind
filter with a coffee filter.
7 Now the machine is ready for use again.
6.3 PID-Temperature Control
The PID-Temperature control allows you to adjust the current temperature of the coffee and the steam. This means
that you can extract your espresso, and steam your milk, at a variety of temperatures. The PID-display indicates the
boiler temperature.
Temperature (here 92°C)
If the steam production is not currently employed, you will see the temperature for making espresso/coffee. As soon
as you switch to making steam, you will see the boiler being heated and the temperature of the steam is indicated.
The PID alternately shows the temperature and the ‘St’-display for steam. The brewing time in seconds is displayed
during the brewing process.
Classika PID important!
During the heat phase, the orange control lamp and the small dot on the PID-display will blink.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm Classika PID at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm Classika PID in the language / languages: English, German as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info