362369
10
Zoom out
Zoom in
Previous page
1/16
Next page
ENGLISH
Instruction manual CASA
9
9 Trouble-shooting
If a coffee bean is stuck in the crushing mill of the grinder, this problem can be easily solved.
1 Disconnect the power cord to interrupt the current entry. Make sure that children are out of reach.
2 Take out the bean hopper and remove (with the vacuum cleaner) the remaining coffee beans from the crushing
mill.
3 Loosen the upper grinding blade by turning it counter-clockwise (approx. 2 rotations).
4 Reconnect the power cord and switch on the grinder. (Do not reach into the crushing mill.) The crushing mill
operates again.
5 Switch off the grinder again and disconnect the power cord to interrupt the current entry.
6 Now turn back the upper grinding blade clockwise (approx. 2 rotations).
7 Reconnect the power cord, switch on the grinder and replace the bean hopper. The crushing mill of the grinder
operates again.
Problem Possible Cause Trouble-shooting
The grinding degree is not fine
enough
Use a finer grinding degree.
Tamp the ground coffee more firmly.
The coffee mixture is too old. Use fresh coffee
The coffee amount is too small. Use an adequate amount of coffee.
Little or no crema on the top of the
coffee
Change of weather effects and
humidity
Adapt the grinding degree to the
conditions.
The grinding is too fine.
Increase the grinding degree.
Tamp the ground coffee only
slightly.
Sparse coffee dispensing, only drop
by drop
There is too much ground coffee.
Use approx. 7 g of coffee for every
cup.
The grinding degree is not fine
enough.
Reduce the grinding degree.
The coffee is old. Use fresh coffee.
The amount of ground coffee is not
enough.
Use an adequate amount of coffee.
Weak “body”
The net filter is dirty. Clean the net filter.
The coffee mixture is improper Use another coffee mixture
Foam instead of crema
The grinding degree of the coffee
grinder is not suited for the coffee
mixture in use
Adjust the coffee grinder (When
changing the coffee mixture,
changing the grinding degree can
also be necessary)
10 CE Conformity
Conformity
This product complies with the following directives:
EN291, EN292, EM 60204, DIN 45635 subject to 98/27 / CEE
11 Disposal
WEEE Reg. No.: DE69510123
This product complies with EU Directive 2002/96/EC
and is registered according to WEEE (Waste Electrical and Electronic Equipment).
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm casa ii at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm casa ii in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info