654273
22
Zoom out
Zoom in
Previous page
1/29
Next page
ENGLISH
21
It is recommended to leave the porta filter in the brew group, keeping it warm for optimum
temperature for coffee dispension.
6.2 Preparing coffee
Use the porta filter with 1 spout and the corresponding filter (1 cup) for the preparation of 1 cup.
Use the porta filter with 2 spouts and the big filter (2 cups) for the preparation of 2 cups.
1 For espresso, i.e. Café Crème, fill the finely ground coffee into the corresponding filter. (approx. 7 – 8g per cup).
Please make sure that the filter is inserted firmly into the porta filter.
2 Somewhat compress the ground coffee with a tamper, without applying too much pressure.
3 Clamp the porta filter firmly into the brew group.
4 Place the cup under the spout of the porta filter. (For the preparation of 2 cups, put 1 cup under each spout.)
5 Press the button with the programmed dose of coffee you would like to brew. As soon as the programmed dose
is reached, the filling stops automatically and the remaining water is released into the drip tray.
Remaining pressure / water is released through the lower portion of the brew group.
Only freshly ground coffee allows for an optimal coffee result. Therefore, use a professional coffee
grinder. In our assortment you will find several professional coffee grinders.
We recommend to use a stainless steel tamper with a diameter of 58 mm for optimum tamping.
6.3 Dispensing of hot water
1 Place an adequate water container (with a heat-insulated handle) under the hot water dispenser.
2 Press the hot water button on any of the control panels in order to release a pre-programmed amount of hot
water and the release will stop automatically. The release of hot water can be stopped ahead of time by pressing
the hot water button again.
Caution!
Place the nozzle of the dispenser into the water container in order to avoid injuries due to hot water
sprayings.
The cold water mixing valve allows for an individual adjustment of the hot water temperature (pic). It is located at
the middle part of the machine, below the drip tray.
6.4 Dispensing of steam
The Barista A2/Barista A3 makes it possible to generate large amounts of steam in order to heat or froth beverages,
e. g. milk or punch. It is a professional espresso coffee machine with an enormous steam volume. Therfore, within a
few seconds you can prepare milk froth. Please pay attention to the instructions below. Do not bring the milk to a
boil, otherwise frothing milk will not be possible.
adjustment screw
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm Barista A3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm Barista A3 in the language / languages: English, German as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info