654273
21
Zoom out
Zoom in
Previous page
1/29
Next page
ENGLISH
20
2 Choose the button you would like to program and press it for a short time. Coffee is released into the cup.
3 As soon as the desired quantity of coffee is reached, press the button again. Thus, the dose for the chosen
button has been programmed.
4 The button for hot water is programmed in the same manner as the coffee buttons.
Please note that the doses can vary if different quantities of coffee are used for coffee preparation
or if the imposed pressure on the coffee is different while tamping.
Every button can be re-programmed at any time.
5.3 Activation of the pre-infusion
During pre-infusion, the coffee grounds are dampened prior to the espresso extraction and slowly well up. This
makes the coffee puck more stable and keeps it from being destroyed by the high brewing pressure. Furthermore, the
oils and aromas are able to develop prior to extraction.
Please follow below steps to activate the pre-infusion:
Only the left brew group is used to set up pre-infusion.
1 The machine is turned off.
2 Depress button 2 (1 espresso) and switch the machine on. The lamp of that button becomes illuminated.
Release the button.
3 Turn the machine off.
4 When the machine is then switched on again, the pre-infusion on all brew groups is activated on buttons 2 (1
espresso) and 3 (large cup) only. No provisions for a pre-infusion have been made for buttons 4 and 5.
5.4 Deactivating the pre-infusion
Please follow below steps to deactivate the pre-infusion:
Only the left brew group is used to deactivate pre-infusion.
1 The machine is turned off.
2 Depress button 3 (1 large cup) and switch the machine on. That button becomes illuminated. Release the
button.
3 Switch the machine off.
4 When the machine is then switched on again, the pre-infusion on all
brew groups is deactivated.
6 USE OF THE MACHINE
6.1 Preparation of the machine
The switched off machine is to be placed in operation as follows:
1 Make sure that there is water pressure in the supply hose.
2 Turn the machine on (power switch in position “2”).
3 Wait until the pressure gauge indicates approx. 1.0-1.25 bar.
4 Depending on the ambient temperature, the heating-up phase is approx. 45 minutes.
5 The machine is now ready for use.
6 Before preparing the first coffee, clamp the porta filter into the brew group and press the desired button of the
control panel. Release some water from the brew group. This way, the porta filter has an optimum temperature.
7 The regulation of the pump pressure takes place via the adjustment
screw at the bottom of the machine (Pic. 1). In order to read the
current pump pressure, insert the porta filter with blind filter into any of
the brew groups and press the P-button. The current pump pressure
can be read from the gauge. Stop the water flow by pressing the P-
button once again. Now start the adjustment of the pump pressure and
repeat point 7 until the desired pressure has been reached. The pump
pressure changes with the change in the plumbing pressure.
Pic.1, adjustment screw for the pump pressure
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm Barista A3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm Barista A3 in the language / languages: English, German as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info