818967
35
Zoom out
Zoom in
Previous page
1/205
Next page
Chapter 6 How Turfmow 1000 works
When the robot leaves the station it follows the station loop wire, until it reaches point A. This
is a pre-defined distance within the main field peripheral wire.
At this point it will turn and follow the track border of the field connected to the station loop
until it reaches point B, which is where the two mowing fields overlap.
Once in "Parcel R", it will travel for a certain distance along the track border in this parcel until
it reaches point C, when it will turn into the field and start mowing.
The distance the robot travels along the track border before starting to mow and the angle it
turns through are specified in the StartZone parameters for the parcel in which the mowing
starts (Parcel R in this example).
6.2 Inactive state
Some condition may arise which causes the robot to halt its autonomous mowing mission and
enter an inactive state until the active mowing mission can be resumed.
Figure 27: Inactive modes
The robot will stop operating in autonomous mode and enter the inactive state because:
Case 1: a problem has arisen and the robot will enter the Alarm mode (page 36),
Turfmow 1000 Technician's Manual Version: Release 3.5 Last updated: 2018-12-20 35
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Echo Turfmow 1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Echo Turfmow 1000 in the language / languages: English as an attachment in your email.

The manual is 26.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info