782628
13
Zoom out
Zoom in
Previous page
1/39
Next page
13
ENGLISH
Support: Support.Eccotemp.com Shop Online: eu.Eccotemp.com Store Locator: eu.Eccotemp.com/locator
PLEASE NOTE: SH12 IS FOR INDOOR PERMANENT INSTALLATIONS ONLY. THIS MANUAL AND ALL ECCOTEMP CONTENT IS SUBJECT TO CHANGE WITHOUT
NOTICE. PLEASE VISIT SUPPORT.ECCOTEMP.COM FOR THE MOST UP TO DATE WARRANTY AND MANUAL.
INSTALLATION
illustration to the right).
To conserve energy and to prevent freezing, insulate both cold and hot water
purposes. Before connecting the water supply pipe to the water heater, open the
the right. You’ll adjust this as needed seasonally to achieve desired temperatures.
If a water heater is installed in a closed water supply system, such as one having
inspector on how to control this situation.
CAUTION: This water heater must only be used with the following water supply system conditions:
• With clean, potable water free of corrosive chemicals, sand, dirt, or other contaminates.
• Free of lime and scale deposits.
DO NOT reverse the hot and cold water connections. The water heater will not operate.
To ensure proper operation of the water heater, the following water pressure guidelines should
be followed:
and 1.89 LPM to maintain activation.
kPa) must be ensured. The
measurement should be calculated by the distance between the water inlet of the water heater (ground level)
Well water systems should be set at a range of 50-60 psi(344-413 kPa).
When the water is supplied from a water supply tank, the height of the tank and the diameter of the pipes
and their relation to water pressure, should be taken into consideration. Gravity water pressure is not
recommended.
NOTICE: Do not apply heat to the HOT or COLD water connections. Any heat applied to the water supply
NOTICE: If the water pressure resistance of a shower head is too high, the burner in the water heater will fail
to ignite. Keep the shower head clean from debris that could cause additional pressure drop.
overcoming hot water line pressure.
DO NOT use pipes with smaller diameters than the water supply connection of the water heater.
Be sure to connect the water inlet and the hot water outlet as shown on the water heater on page 12. If reversed,
the water heater will not function.
the water heater may disconnect easily for servicing if necessary.
plumbing materials and tools only.
Water Connections
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eccotemp SH12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eccotemp SH12 in the language / languages: English as an attachment in your email.

The manual is 4.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eccotemp SH12

Eccotemp SH12 User Manual - German - 39 pages

Eccotemp SH12 User Manual - Dutch - 39 pages

Eccotemp SH12 User Manual - French - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info