Manual Ebode TPC (page 7 of 32) (English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian)

611860

Zoom out

Zoom in

1/32

Transmitter - Wireless Remote Control Ref : TPC

July 2009 page 7 TPC

The LED will blink Red for House Code then Green for Unit Code

(the factory setting is A1: One Red blink and one Green blink),

then go to Yellow (program mode).

Go to the next step to congure the House Code and Unit Code.

After 6 seconds the modules will return to normal operation and

leave the program mode.

B. Press and release the ON key the appropriate number of times

for the House Code you want to set. Once for A, twice for B, etc.

The factory setting will be “A = 1 Red Blink”

After setting the House Code, the Yellow LED will blink 3 times,

which means the House Code is set and the module has left the

programming mode.

To set the Unit Code, start from step A but skip step B and go

directly to step C.

C. Press and release the ON key the appropriate number of times

for the House Code you want to set. Once for 1, twice for 2 etc.

The factory setting will be “1 = 1 GREEN Blink”

After setting the UNIT Code, the YELLOW LED will blink 3 times,

which means the UNITE Code is set and the module has leave the

program mode.

To congure the second row, repeat step A, B and C.

Note: When changing the battery, the address will be retained.

Operating the TPC Module

Check the address.

Briey press the rst row ON and OFF button simultaneously to check the

address. e.g. for “B3” the red LED will blink twice for the house code and then

green 3 times for the unit code.

Wait until the LED blinks yellow 3 times to show it has left the programming

mode.

The same can be done with the second row of buttons.

Stop

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ebode TPC in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ebode TPC Manual

Product: