Manual Ebode TPC (page 6 of 32) (English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian)

611860

Zoom out

Zoom in

1/32

Transmitter - Wireless Remote Control Ref : TPC

July 2009 page 6 TPC

X10 address

The X10 address consists of a House Code and a Unit Code.

In order to control modules via the TPC remote, the receiving

modules need to be set to the same unique X10 address.

General information:

1. The default conguration is set A1 and A2.

This means you can remotely control any X10 compatible receiver which is set

to address A1:

a) Like e.g. the ebode receivers RMA, RMV, RPT, RPA, RPL (RPA

and RPL require a RF transceiver in order to convert the RF

signals to X10 power line commands, e.g the RPT).

b) Or Classic X10 Receivers with rotary address selectors, e.g

TM13, CM15 or SC28 security console, when set to the same

House code, A.

2. The LED’s on the front of the remote control show the following state:

GREEN LED: On / bright

RED LED: Off / dimming

Both button rows can control 2 different X10 addresses:

Example as factory set:

First key row: Address A1

Functions: ON / OFF/ DIMMING

Second key row: Address A2 (can be set on any required

X10 address)

Functions: ON / OFF / DIMMING

Programming the remote

ENTER programming mode to change current address

INFO

LED’s show the different status as follows :

Red LED for the House code (A to P)

Green LED for the Unit code (1 to 16)

Yellow status to enter and exit programming mode

A. To enter program mode, simultaneously press and hold the On and Off but-

ton until the LED turns yellow. (1 second).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ebode TPC in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ebode TPC Manual

Product: