Manual Ebode RPL (page 6 of 24) (English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian)

611863

Zoom out

Zoom in

1/24

Receiver - Plug-In Dimmer Module Ref : RPL

July 2009 page 6 RPL

1. Plug the lamp into

the module.

2. Plug the module

into a socket.

Installing the lamp module

NOTE:

- Make sure not to plug an appliance into the RPL.

- Make sure the light is powered on.

X10 address

The X10 address consists of a House Code and a Unit Code.

In order for this module to respond to a command sent via the

Power line, the module needs to be initialized. It is possible to

congure multiple addresses for this module.

Programming the RPL module

If you want to control the RPL via a RF remote like the ebode TPC,

EM or IMRF, you need to install a RF transceiver (e.g. RPT, TM13,

CM15 or SC28 security console).

1. Use a small pointed object, e.g. a paper clip, to shortly press the

setup button. This button is situated in the small opening between

the two LEDs. When the button is pressed, the green LED will blink

quickly, waiting for a command.

2. Send the ‘power on’ command for the desired address.

3. The LED will stop blinking.

4. The lamp module address is now stored.

5. If you wish to congure additional addresses repeat this procedure

from step 1.

General information

- The RPL Lamp module can be congured to respond to up to 32 X10

addresses.

- The led will blink red when ON/OFF commands are received.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ebode RPL in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 0,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ebode RPL Manual

Product: