611761

Ebode IR Link Pro Manual

5
Zoom out
Zoom in
Previous page
1/36
Next page
24-8-2010 5 IR Link Pro
3. Locate the IRLPRO IR Receiver in a location outside of the equipment cabinet or closet that
will have a straight line-of-sight view of your Hand Held Remote(s). The Receiver can be fixed to
the surface by using the double side tape pad or via a slide on screw hole on the bottom of the
unit.
4. Plug the red mini-plug of the IRLPRO IR Receiver into the red labelled "IR RCVR" jack on the
IRHUB2 Connecting Block.
5. Plug the 12VDC Power Supply into an unswitched 230V~50Hz outlet.
NOTE: It is important that you use an unswitched AC outlet so that the IR system is always active
for system power ON commands.
6. Plug the 2.1mm "C" plug of the Power Supply Adapter into the "+12VDC" jack on the IRHUB2
Connecting Block.
STATUS
You can send a Power Status signal to the IRLPRO IR Receiver by connecting a power adapter
to this connection (not supplied; 5 - 12VDC), which e.g. is switched by the device to be
controlled. When the A/V device or contact is switched on, the Amber Status LED will light up in
the IRLPRO IR Receiver so that you can see that the A/V device is switched on. (see figure 3).
The input voltage range is 5 – 12VDC. Socket 2.1mm, pin configuration: centre/red is ST/+VDC,
sleeve/black is GND.
6. Operation
The IR repeater system should now operate each of the controlled components. When the
system is operating correctly, you should see a Blue "talk-back" LED flash on the front of the
IRLPRO IR Receiver when you aim your hand held remote control(s) at it and press the buttons.
7. How to avoid and solve possible problems
Although the ebode IR Link Pro is equipped with proprietary eIR
2
x
TM
(pronounced Irex)
Technology, which guarantees a high level of immunity of InfraRed noise from direct sunlight,
CFL lighting and Flat Panel TV’s (including Plasma, LCD and LED), in rare cases, the IRLP IR
Receiver may have to be moved to a different location if the unit is picking up unexpected
interference. This interference may, in severe cases, prevent the system from working.
After repositioning, check to see if the IR Link Pro operates the satellite Receiver or other
components. If the IR Link Pro still does not work, reposition the IRED Emitter(s). It may not be
located directly over the component’s InfraRed receiving "window". Consult the owner's
manual of the unit or the manufacturer for the exact location of the InfraRed "window".
Fi
g
3
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode IR Link Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IR Link Pro in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info