611761
4
Zoom out
Zoom in
Previous page
1/36
Next page
24-8-2010 4 IR Link Pro
The IR Link Pro is a mains powered InfraRed Extender System that allows full remote control
operation of audio/video components (such as your Blu-ray player, A/V Receiver, DVR, Satellite
Box, Cable Tuner, etc.) which are located behind closed cabinet doors, in other rooms, or other
concealed and/or out-of-sight locations.
An InfraRed Extender in general consists of an IR (InfraRed) capture device, the IR Receiver, a
distribution circuit/connecting block, the IR Hub, and finally the IR LED output, the IR Emitter,
which flashes the IR signal to the A/V component.
3. Kit content
The IR Link Pro is a pre-packaged InfraRed Remote Control Extender System. It includes an
IRLPRO IR Link Pro Table Top IR Receiver, an IRHUB2 Connecting Block with 2 Emitter outputs +
Status input Jumper Cable, a 3IREDB Triple Blinking Emitter, a 1IRQC Quick Connect cable and a
12VDC Power Supply. These parts are all that are necessary to control up to four components.
4. How does the ebode IR Link Pro work?
The ebode IR Link Pro is intended for use in IR control systems where the IRHUB2 Connecting
Block is within reach of the 2-meter cable of the IRLPRO IR Receiver, e.g. when installing the IR
Link Pro in a cabinet where the controlled components are behind closed doors, and the
IRLPRO Receiver can be located on top of the cabinet, within line of sight of your remote
control.
5. Installing the ebode IR Link Pro
The Hub sockets are colour coded for easy plug & play installation of the IR Receiver and IRED
Emitters, which have coloured jacks.
A typical system is shown in Fig. 1 below. Refer to this diagram and the procedure that follows
when making connections:
1. Attach the 3IREDB Emitters onto the IR Sensor Windows of the components
in your system that you wish to control. Refer to Fig. 2.
2a. Plug the yellow mini plugs of the 3IREDB into one of the yellow labelled
"EMITTERS" jacks of the IRHUB2 Connecting Block.
2b. Plug the IRQC cable into one of the yellow labelled “EMITTERS” jacks of
the IRHUB2, and the other side into the 3.5 mm mono IR input of your AVR.
IRED Mono TS 3.5mm pin configuration: tip is IR Data, sleeve is Ground.
(PLEASE CHECK THE MANUAL OF THE DEVICE FOR MATCHING PIN CONFIGURATION)
Fi
g
1
Fi
g
2
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode IR Link Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IR Link Pro in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info