611763
41
Zoom out
Zoom in
Previous page
1/44
Next page
7-4-2011 Rev2 41 IR Link Pro Flush
Nella parte superiore dell’armadio c'è un intaglio per l'installazione del cavo jumper. La posizione
predefinita del jumper è la posizione JP1 di parcheggio. Le posizioni di risposta dei led di stato
sono 3:
- Predefinita, JP in posizione JP1: LED Feedback attivo e LED di stato inattivo/inutilizzato
- JP in posizione JP2: LED Feedback attivo e LED di stato entrambi sempre OFF
- Cavo JP in posizione JP2 con tensione entro il range: LED Feedback e LED di stato attivi (se la
tensione esterna è presente)
- JP in posizione JP3: LED Feedback attivo e LED di stato sempre ON (in base all’alimentazione a
IRHUB4)
6. Funzionamento
Il sistema di ripetizione IR dovrebbe ora far funzionare ciascuno dei componenti controllati.
Quando il sistema funziona correttamente, si dovrebbe vedere un lampeggiamento del LED Blu
"di riscontro" sulla parte frontale del Ricevitore IR IRLPRO Flush quando si punta il telecomando e si
preme uno dei suoi pulsanti.
7. Come evitare e risolvere eventuali problemi
Anche se l'ebode IR Link Pro Flush garantisce un alto livello di immunità ai raggi InfraRossi (IR) nei
confronti del rumore della luce del sole, dell'illuminazione CFL e dei TV a schermo piatto
(compresi plasma, LCD e LED), in rari casi, il Ricevitore IR potrebbe dover essere spostato in una
posizione diversa se l'unità sta rilevando interferenze inaspettate. Questa interferenza può, in casi
gravi, impedire al sistema di funzionare. È possibile identificare le interferenze quando gli
Emettitori a InfraRossi sono accesi, anche quando non si sta usando un telecomando che
trasmette in quel momento.
Dopo il riposizionamento, controllare per vedere se il IR Link Pro Flush fa funzionare il Ricevitore
satellitare o altri componenti. Se il IR Link Pro Flush continua a non funzionare, riposizionare
l'Emettitore (o gli Emettitori) IRED. Esso può non essere situato direttamente sopra la "finestra" di
ricezione ad InfraRossi del componente. Consultare il manuale utente dell'unità o il produttore
per l'ubicazione esatta della "finestra" InfraRossi.
IMPORTANTE: Per le installazioni che coinvolgono più di due stanze remote, usare i servizi di un
installatore professionista competente audio/video con esperienza nei Sistemi di Controllo a
Distanza con InfraRossi.
Hai ancora qualche domanda da porre? Visita www.ebodeelectronics.eu
8. Informazioni tecniche
SPECIFICHE RICEVITORE IR IRLPRO FLUSH
Larghezza di banda di frequenza di modulazione degli InfraRossi: 30 - 60 kHz.
Lunghezza del cavo 3m, prolungabile fino a max. 300 metri (UTP o equivalente).
Configurazione dei pin della presa TRRS da 3,5mm rossa dalla punta alla guaina:
o Punta = Giallo = Dati IR
o Anello 1 = Nero = Terra
o Anello 2 = rosso = +12 VDC
o Guaina = bianco = Stato
Campo di ricezione: Fino a 10 metri, a seconda delle condizioni locali e del telecomando
utilizzato.
Angolo di ricezione: 45 gradi fuori asse.
LED Talkback (BLU). Indica la ricezione InfraRossi solo quando gli Emettitori sono collegati.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode IR Link Pro Flush at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IR Link Pro Flush in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info