611763
40
Zoom out
Zoom in
Previous page
1/44
Next page
7-4-2011 Rev2 40 IR Link Pro Flush
1. Fissare gli Emettitori 3IREDB sulla Finestra del Sensore IR dei componenti nel sistema che si
desidera controllare. Fare riferimento alle Fig. 2.
2a. Inserire le mini spine gialle del 3IREDB in una delle spine jack gialle
"EMETTITORI" del Blocco di Collegamento IRHUB4.
2b. Collegare il cavo IRQC in una delle prese jack gialle con l'etichetta
"EMETTITORI" del IRHUB4, e l'altra estremità nell'ingresso IR mono da 3,5 mm
del vostro AVR. Configurazione dei pin da 3,5mm TS Mono IRED: la punta è IR
Dati, la guaina è a Terra. (SI PREGA DI CONTROLLARE IL MANUALE DEL
DISPOSITIVO PER LA CONFIGURAZIONE CORRISPONDENTE DEI PIN)
3. Trapanate un foro da 12 mm di diametro dovete volete posizionare il Ricevitore IR. Rimuovete il
dado e inserite il cavo e l'asse filettato nel foro in modo che il ricevitore sia rivolto verso
l'ambiente (e in modo che abbia visibilità in linea d'aria verso il telecomando). Riposizionate il
dado e serratelo in modo da mantenere il ricevitore in posizione..
4. Collegare la mini-spina rossa del Ricevitore IR IRLPRO Mini nella presa jack rossa "IR RCVR" sul
Blocco di Collegamento IRHUB4.
5. Collegare l'Alimentazione a 12Vdc in una presa non comandata da 230V ~ 50Hz.
NOTA: È importante che si utilizzi una presa AC non comandata in modo che il sistema di IR sia
sempre attivo per i comandi di accensione del sistema.
6. Inserire la spina "C" da 2,1mm dell’Alimentatore nella presa jack "+ 12VDC" sul Blocco di
Collegamento IRHUB4.
STATO
Si può inviare un segnale dello Stato di Alimentazione al Ricevitore IR IRLPRO Flush collegando un
adattatore di Alimentazione a questo collegamento (non in dotazione; 5 – 24 VDC & 5 – 12 VAC),
che ad esempio viene attivato dal dispositivo da controllare. Quando il dispositivo A / V o il
contatto è acceso, il LED di Stato Ambra si accende nel Ricevitore IR IRLPRO Flush in modo che si
possa vedere che il dispositivo A / V è acceso. (vedi figura 3). La gamma di tensione di ingresso è
5 – 24 VDC & 5 – 12 VAC. Configurazione dei pin della presa da 2,1 mm: centro / rosso è + VDC,
guaina / nero è la Massa.
Fi
g
2
Fi
g
3
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode IR Link Pro Flush at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IR Link Pro Flush in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info