611763
31
Zoom out
Zoom in
Previous page
1/44
Next page
7-4-2011 Rev2 31 IR Link Pro Flush
En la parte superior del gabinete existe un orificio para colocar el puente. La posición
predeterminada del puente es la posición de estacionamiento JP1. Tiene tres posiciones
diferentes de luz LED de respuesta:
- Posición predeterminada JP1: luz LED activa y estado LED no activo/inutilizado
- JP en la posición JP2: luz LED y estado LED ambos siempre OFF (apagados)
- Cable JP en posición JP2 con el suministro de corriente dentro del rango: luz LED y estado LED
activos (dependiendo del voltaje externo existente)
- JP en posición JP3: luz LED activa y estado LED siempre ON (encendido) (dependiendo de la
corriente a IRHUB4)
6. Funcionamiento
El sistema Repetidor IR debería hacer funcionar cada uno de los componentes a controlar.
Cuando el sistema funciona correctamente, usted debería ver el LED azul de "respuesta”
parpadear en el frontal del Receptor IR IRLPRO Flush cuando le apunte con su(s) mando(s) de
control remoto y pulse los botones.
7. Cómo evitar y resolver posibles problemas
Aunque el ebode IR Link Pro Flush está equipado con la marca registrada eIR
2
x
TM
(pronunciado
Irex) Technology, que garantiza un alto nivel de inmunidad de ruido de InfrarRojos de la luz solar
directa, luz CFL y pantalla plana de televisión (incluidos los de plasma, LCD y LED), en
determinados casos, el Receptor tendrá que moverse a otra posición por estar recibiendo
interferencias inesperadas.
Estas interferencias pueden en ocasiones afectar al funcionamiento del sistema. Vd. podrá
identificar la existencia de interferencias cuando observe que los Emisores de IR lucen, incluso
cuando Vd. no está utilizando ningún mando a distancia en ese momento.
Después del cambio de posición, verifique si el IR Link Pro Flush actúa sobre el receptor de
satélite o sobre cualquier otro equipo. Si continuara sin funcionar, vuelva a posicionar los
Emisores IR. Estos no deberían situarse exactamente sobre el punto de recepción de IR
existente en la ventana (display) del equipo. Consulte el manual de instrucciones del equipo
para conocer con exactitud la ubicación de dicha ventana.
IMPORTANTE: Para instalaciones con más de dos habitaciones remotas, sírvase de los servicios de
un instalador profesional competente de audio / video con experiencia en sistemas de control
remoto por infrarrojos.
¿Todavía tiene preguntas? Por favor refiérase a www.ebodeelectronics.eu
8. Información técnica
ESPECIFICACIONES DEL RECEPTOR IR IRLPRO FLUSH
Ancho de banda de la frecuencia de modulación infrarRoja: 30 - 60 kHz.
Longitud de cable 3m, extensible a un máx. de 300 metros (UTP o equivalente).
Configuración de pin de la clavija TRRS de 3,5mm roja, desde la punta a la manga:
o Punta = amarillo = Datos IR
o Anillo 1 = negro = Tierra
o Anillo 2 = rojo = +12VCC
o Manga = blanco = Estado
Alcance de recepción: Hasta 10 metros, dependiendo de las condiciones del local y el
control remoto usado.
Ángulo de recepción: 45 grados a uno y otro lado del eje.
LED de “Respuesta” (AZUL). Indica recepción infrarroja solamente cuando están
conectados el (los) Emisor(es).
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode IR Link Pro Flush at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IR Link Pro Flush in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info