611763
30
Zoom out
Zoom in
Previous page
1/44
Next page
7-4-2011 Rev2 30 IR Link Pro Flush
1. Fije los Emisores 3IREDB sobre las Ventanas de los Sensores IR de los componentes de su sistema
que desee controlar. Vea las Figs. 2.
2a. Conecte la mini-clavija amarilla del 3IREDB en uno de los conectores
"EMITTERS" amarillos del Bloque de Conexiones IRHUB4.
2b. Conecte el cable IRQC en uno de los conectores amarillos con la
etiqueta “EMITTERS” del IRHUB4, y el otro extremo en la entrada IR mono
de 3,5 mm de su AVR. La configuración del pin de 3,5 mm IRED Mono TS
es: La Punta son Datos IR, la Manga es toma de Tierra. (POR FAVOR LEA
EL MANUAL DEL DISPOSITIVO PARA VER SI SE AJUSTA LA CONFIGURACIÓN
DEL PIN)
3. Taladre un agujero de 12 mm de ancho en el que desea colocar el receptor de
infrarrojos. Retire el tornillo-tuerca, empuje el receptor de cable y el hilo a través del agujero
con el objetivo orientado a la habitación (y en la línea de mira del mando a
distancia). Atornille la tuerca de nuevo hasta que esté apretado para mantener el receptor en
su lugar.
4. Conecte la mini-clavija roja del Receptor IR IRLPRO Flush en el conector rojo "IR RCVR" del
Bloque de Conexiones IRHUB2.
5. Enchufe el adaptador eléctrico de 12VCC en una toma de corriente de 230V~50Hz no
controlada por interruptor.
NOTA: Es importante que use una toma de corriente alterna no controlada por interruptor para
que el sistema IR esté siempre activo para las órdenes de ENCENDIDO de los equipos.
6. Conecte la clavija “C” de 2,1mm del Adaptador Eléctrico en el conector "+12VDC" del
Bloque de Conexiones IRHUB4.
ESTADO
Usted puede enviar una señal de Estado de Alimentación al Receptor IR IRLPRO Flush
conectando un adaptador eléctrico a esta conexión (no suministrado; 5 -24 VCC & 5 – 12 VAC),
el cual p. ej. se conecta por del dispositivo a controlar. Cuando el dispositivo A/V se enciende o
el contacto se activa, el LED de Estado Ámbar se ilumina en el Receptor IR IRLPRO Flush de
modo que puede ver que el dispositivo de A/V esencendido. (vea la figura 3). El rango de la
tensión de entrada es 5 -24 VCC & 5 – 12 VAC. La configuración del pin del conector de 2,1mm
es: centro/rojo es +VCC, manga/negro es la toma de Tierra.
Fi
g
2
Fi
g
3
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode IR Link Pro Flush at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IR Link Pro Flush in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info