611763
11
Zoom out
Zoom in
Previous page
1/44
Next page
7-4-2011 Rev2 11 IR Link Pro Flush
Steckbrückenpositionen:
- Standard, Steckbrücke (JP) auf Position JP1: Feedback-LED aktiv & Status-LED nicht aktiv/wird
nicht verwendet
- Steckbrücke auf Position JP2: Sowohl Feedback-LED als auch Status-LED immer AUS
- Überbrückungskabel auf JP2 mit Spannungsversorgung innerhalb des Bereichs: Feedback-LED &
Status-LED aktiv (je nachdem, ob externe Spannung vorhanden)
- Steckbrücke auf Position JP3: Feedback-LED aktiv & Status-LED immer AN (abhängig von
Stromversorgung zum IRHUB4)
6. Gebrauch
Das IR-Zwischenverstärkersystem betreibt nun jede der gesteuerten Komponenten. Arbeitet das
System korrekt, so blinkt eine blaue „Rückmelde“-LED auf der Frontblende des IRLPRO Flush IR-
Receivers, wenn Sie Ihre Fernbedienung(en) auf ihn ausrichten und eine der Tasten drücken.
7. Problemlösungen
Obwohl der ebode IR Link Pro Flush mit geschützter eIR
2
x
TM
(sprich: Eirex) Technologie ausgestattet
ist, die ein Höchstmaß an Immunität gegen Infrarotstörungen durch direkte Sonneneinstrahlung,
CFL-Lampen und Flachbildschirme (einschließlich Plasma, LCD und LED) bietet, kann in
Ausnahmefällen ein Umsetzen des IR-Empfängers in eine andere Position notwendig sein, falls das
Gerät unerwartete Störungen aufnimmt. Diese Störungen können im schlimmsten Fall das System
am Betrieb hindern. Sie können Störungen identifizieren, wenn die IR-Emitter leuchten, selbst wenn
Sie zu dem Zeitpunkt keine Fernbedienung benutzen.
Überprüfen Sie nach dem Umsetzen, ob der IR Link Pro Flush den Satellitenempfänger oder
andere Komponenten steuert. Arbeitet der IR Link Pro Flush immer noch nicht, so setzen Sie
den/die IRED-Emitter um. Bringen Sie ihn nicht direkt über dem Infrarot-Empfangsfenster der
Komponente an. Sehen Sie die genaue Position des Infrarot-Empfangsfensters in der
Bedienungsanleitung des betreffenden Geräts nach oder wenden Sie sich an den Hersteller.
WICHTIGER HINWEIS: Für Installationen mit mehr als zwei entfernten Räumen benutzen Sie bitte die
Dienste eines kompetenten professionellen Audio-/Videoinstallateurs, der Erfahrung mit Infrarot-
Fernbedienungssystemen hat.
Haben Sie noch Fragen? Schauen Sie auf unsere Website www.ebodeelectronics.eu
.
8. Technische Informationen
IRLPRO FLUSH IR RECEIVER SPEZIFIKATIONEN
InfraRot Modulationsfrequenz Bandbreite: 30 - 60 kHz.
Kabellänge 3 m, erweiterbar bis max. 300 m (UTP oder ähnlich).
Roter 3,5 mm TRRS-Stecker Pin-Konfiguration von Spitze zu Manschette:
o Spitze = gelb = IR-Daten
o Ring 1 = schwarz = Masse
o Ring 2 = rot = +12 V DC
o Manschette = weiß = Status
Empfangsreichweite: Bis zu 10 m, abhängig von den örtlichen Bedingungen und der
benutzten Fernbedienung.
Empfangswinkel: 45 Grad von Achse versetzt.
Rückmelde-LED (BLAU). Anzeige von InfraRot-Empfang nur, wenn Emitter angeschlossen
ist/sind.
Status-LED (BERNSTEINFARBEN). Anzeige Einschaltstatus des A/V-Systems.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode IR Link Pro Flush at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IR Link Pro Flush in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info