Manual Ebode IPV68 (page 12 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

611776

Zoom out

Zoom in

1/76

March 2013 IPV68

Note: The software searches IP Servers automatically over your LAN. It may take a few minutes before

the IP address appears in the list. There are 3 cases:

1. No IP Cameras found within LAN. After about 1 minute search, the Result Field will show “not found IP

Server” and the program shut down automatically.

2. IP Cameras have been installed within LAN. All the IP Cameras will be listed and the total number is

displayed in the result field as shown in Figure 1.9.

3. The IP Cameras installed within LAN do not share the same subnet with the monitoring PC. A prompt

will be shown in result field (prompt: Subnet doesn’t match, double click to change!). Click the

left mouse button to choose the prompt and click the right mouse button, choose Network

Configuration to set the static IP address of the Camera to the same subnet as your LAN. (Figure

2.3).

NOTE: If it shows” Subnet doesn’t match, double click to change!” you can also choose ”Obtain IP

from DHCP Server” to get a dynamic IP. (Figure 2.2). If the camera still doesn`t show in the IP Camera

Tool please use the Reset button on the bottom of the camera and hold it for 15 seconds with the power

on. (Figure 1.3)

Please be sure your computer is on the same network as the camera !

Mac Users:

Browse to the Mac folder x:\ebode IP Vision software\IP Camera Tool.app\Contents

and install the IP Camera Tool.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IPV68 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ebode IPV68 Manual

Product: