Manual Ebode IPV68 (page 14 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

611776

Zoom out

Zoom in

1/76

March 2013 IPV68

2.7.3 Network Configuration

Below shows how you can configure the Network parameters.

Figure 2.2

Obtain IP from DHCP server: If clicked, the device will obtain IP from DHCP server. In other words, the

camera will have a dynamic IP. (Make sure the Router which the camera connects to has DHCP function

and DHCP is enabled). (Figure 2.2).

Figure 2.3

IP address: Fill in the IP address assigned and make sure it is in the same subnet as the Gateway, and

the subnet should be the same as your computer or router. (I.e. the first three sections are the same).

Subnet Mask: The default subnet mask of the equipment is: 255.255.255.0. You can find the subnet

mask from your PC or router.

Gateway: Make sure it is in the same subnet with PC’s IP address .Here gateway is the LAN IP of your

router.

DNS Server: IP address of IPS network provider. You can also set it to the same as the Gateway.

NOTE: You can find the Subnet Mask, Gateway, DNS Server from your router, or check the local

connection status of your computer, to get all the parameters. Normally two DNS servers are optional.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IPV68 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ebode IPV68 Manual

Product: