780502
12
Zoom out
Zoom in
Previous page
1/27
Next page
If your eBike includes factory-installed lights you can control
them using the iWoc® Remote. The manufacturer can include
this function or not, depending on the eBike model. In order
to switch the eBike lights, the iWoc® must be coded to
support it (From factory or dealer network).
The button that controls that function is the “B” button. You
will need to long press (press and hold) that button to switch
on or off the lights. In order to show the user that the lights
are ON or OFF, and to confirm the command to the user, the
RGB light of the iWoc will flash in white each time the lights
are switching.
5.5 Light Control
B
Page 12
iWoc® Standard - Manual
1
B
A
2
If you are using the ebikemotion® APP the user will receive
an alert on the phone to show the change of status of the
lights. An icon will be permanently displayed when the lights
are on.
In the iWoc® CAN version “EBIWOCCA” the brightness of
the remote LED will be modified automatically if the user has
the eBike lights switched on or off.
- eBike lights switched ON means lower illumination in
remote LED
- eBike lights switched OFF means higher illumination in
remote LED
Usually eBikes can push in different power levels. The rider
must adjust the power level of the drive to the push and
distance target needs. A higher more power level will result
in lower range and greater battery consumption.
If there are more than 3 power assistance levels, iWoc® uses
a simple method with a flashing function to show indicate
the intermediate power assistance level to the user. For
example, one flashing LED means 1, two flashing LEDs 2, one
LED ON + one LED flashing means 3, and so on.
To increase and decrease the assistance level, use buttons
“A” and “B”. The eBike manufacturer typically codes the
upper button of the iWoc® to respond as an increase
function and the lower button as a decrease function. (Keep
in mind that the iWoc® is reversible)
5.6 Setting the Assistance level
Depending on the Motor integration of the eBike
manufacturer, you might be able to have different power
level systems:
- One single way to push with more or less power
- Each power level also represents a different way to
push
The iWoc(r) remote will show you each level using the LED
panel “D” that includes 3 LEDs. Most manufacturers include
3 power Assistance levels. iWoc® can support up to six
power levels plus an additional level named CUSTOM
LEVEL. Check your eBike specifications to know the
configuration of your eBike system
Usually eBike Power levels are represented following this
schema:
A
B
LED Status for Assistance Level Information
No power
3
2
1
Custom Map
1
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebikemotion iWoc at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebikemotion iWoc in the language / languages: English as an attachment in your email.

The manual is 6.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ebikemotion iWoc

Ebikemotion iWoc Quick start guide - English, German, French, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info