780502
10
Zoom out
Zoom in
Previous page
1/27
Next page
Remember to start operating your eBike you will need to
check that:
- You have a sufficiently charged Battery Pack inserted
or connected to your eBike. For further information, check
the Battery Pack instructions from your eBike manufacturer.
- The iWoc® Remote wire is properly connected to the
eBike Display bus connection.
5.1 Requirements
iWoc® Standard - Manual
5. Main Operation
eBike Switching OFF
To switch ON your eBike system short press (press once) on
button “C”. You will see that the LED lights on the iWoc®
initiate a sequence while checking the system, and will then
show the status:
Checking Sequence LED lights:
1. Battery LED panel starts to switch on progressively [3]
2. Assist LED panel starts to switch on progressively [1]
a. If everything is okay, RGB LED lights turn
GREEN and switch OFF. Remote shows battery level and
puts assist at level 1
b. If there is something wrong the RGB LED light
turns RED and starts to blink
Remember that the drive will be activated as soon as you
start to pedal. If you activate the “Walk Mode” the drive will
also start to push assistance. You must have any LED light
ON in the power assist LED indicator [1] to push assistance.
Motor assistance will depend on the level selected in the
remote.
To switch OFF your eBike system long press (press and hold)
button “C”. You will see that the RGB LED lights turn green,
blue, red and finally white before switching off. All LED lights
of the remote will switch off and the eBike system will be
OFF.
eBike Switching ON
C
C
5.2 Starting (Switching ON/OFF eBike)
Once the eBike is switched ON you can control the power
assist level of the system to push assistance or not. To control
this feature, use buttons [A] and [B] to increase or decrease
the power of the drive.
Each time you change the power assist you can modify the
power or modify the assistance motor map depending on
the motor controller integration and performance of the
eBike System.
Increased power assist will be represented in the LED power
assist panel with 1, 2 or 3 LED lights ON. If power assist LED
lights are OFF, it means that motor will now push. If LED lights
are blinking, it means that you are running in one special
map, for example CUSTOM MAP, with a special
configuration.
Push Assistance Motor power ON/OFF
A
B
1
B
CA
2
As soon as you have reached a speed of
25 km/h or stop pedalling in normal
operation, the assistance from the eBike
drive is switched off. The drive is
automatically re-activated as soon you
start pedalling again if the speed is below
25 km/h.
Speed limits for the eBike operation
25Km/h
Page 10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebikemotion iWoc at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebikemotion iWoc in the language / languages: English as an attachment in your email.

The manual is 6.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ebikemotion iWoc

Ebikemotion iWoc Quick start guide - English, German, French, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info