Manual Eberspacher Timer Modulator 701 serie (page 3 of 4) (English)

701137

Zoom out

Zoom in

1/4

Press

and

keys together to erase

stored faults and display shows “EEEE”.

To exit diagnostic mode, press and release

the

key. If stored faults cannot be erased

consult your local dealer.

Heater Run Time

Press and hold the

key until the display

shows the heater run time in hours.

Setting Programme Times

Press the

key and the P1 symbol will

begin to flash. Pressing the

key will

alternate the display between a preset

time display and “OFF”. With P1 flashing

in the time display mode the desired

programme time can be set using the

and

keys.

Once the desired time has been selected

and if no keys are depressed for 8 seconds

the display will revert to the clock mode.

During this 8 second period pressing the

key will select P2 which can be used to

select another programme time or be set to

“OFF” if not required.

A further pressing of the

key will select

the P3 symbol which can be set or turned

off in the same manner as above.

Setting Programme Days

Having set programme times P1, P2 or

P3 or all three, press the

key, all the ‘P’

symbols that have been selected will start

flashing and a box will appear around

one of the days. Press the

key to select

“ON” if you require the selected day to be

programmed, or “OFF” if you do not wish

it to be selected.

To move onto the following day press

the

key once again and select “ON” or

“OFF” as before. Repeat this procedure for

all seven days. To store these settings in

the Timer / Modulator memory, wait for 8

seconds and the display will revert to the

clock mode.

Setting Programme Duration

To set the desired heater duration, press

and hold the

key and whilst holding

repeatedly press the

key to select the

desired time in increments of 10 minutes,

30 minutes, 1 hour, 1 hour 30 minutes, 2

hours up until 8 hours.

NOTE: Continuous operation is not

selectable in this programme mode.

Once stored the preset duration time

cannot be adjusted during heater “ON”

operation.

Switching on the Heater

(Programmed)

To activate your selected program settings,

press the

key to show the P1,P2,P3 (to

determine when the heater will switch on)

or symbol

to turn off all settings.

NOTE: If all presets and days have been

selected to “OFF” pressing the

key will

have no effect.

When the heater has been switched on

manually, it is possible to view which

of the programmed times have been

set and whether or not they have been

activated. Press the

key to view and if

any programmed time has been activated,

its corresponding

will flash. If no

programmed times have been activated

then

flashes. Press the

key to activate

or de-activate the programmed times

as required. Wait 8 seconds and the

display will revert to manual operation

countdown.

Ventilation

To activate Ventilation Mode, repeatedly

press

key until only one segment shows

in the ramp. Press and hold the

key

until

shows and display changes to

1 hour countdown. To stop ventilation,

press

key to return to normal display

time.

Please Note:

The ventilation countdown

time of 1 hour is not adjustable.

Although all the programs are set to "off", the heater still comes on and the only way i can get it to stop is to reduce the temperature.
I have the "c" symbol permanently in the time display so does this mean the heater is operating continuously? How do I turn continuous off? Submitted on 17-10-2020 at 18:23
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eberspacher Timer Modulator 701 serie in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eberspacher Timer Modulator 701 serie Manual

Product: