DEVICE/ SOURCE SELECT [ » CD / TUNER / TAPE / AUX « ]
• Press the appropriate button
* to select a device or change the source:
CD = CD player TUNER = radio TAPE = cassette recorder AUX = external device, e.g. record deck
ADJUST VOLUME [ » VOLUME / MUTE « ]
• To increase the volume use the
button W.
• To reduce the volume use the button Q.
• To mute (silence) the loudspeakers and headphones press the mute button ^.
ADJUST TONE
[ » CLASSIC / ROCK / POP « ]
Use the tone selector button
% to set the tone quality of a track to suit the type of music and increase listening pleasure. The
current setting CLASSIC, ROCK or POP is shown in the display
@ - (blank display = neutral tone).
HEADPHONES [ » PHONES « ]
8-32 Ohm stereo headphones
5 can be connected to the headphones connector with a 3.5 mm jack plug. As soon as the headphones
are connected the loudspeakers are turned off. Please note that high levels of sound can lead to serious hearing damage.
SETTING THE CLOCK
01) Press the Display button R to change to the time operating indicator.
02) Press and hold down the MEMORY/CLK-ADJ button
\. The 24 hour mode indicator (24 H) flashes.
03) Press the Up/Forward button ) or the Down/Reverse button 8 to set the clock in 24 hour or 12 hour display.
04) Press the MEMORY/CLK-ADJ button \ again - the hours indicator flashes.
05) Set the hours using the Up/Forward button ) or the Down/Reverse button 8.
06) Press the MEMORY/CLK-ADJ button
\ again - the minutes indicator flashes.
07) Set the minutes using the Up/Forward button ) or Down/Reverse button 8.
08) Press the MEMORY/CLK-ADJ button \ again - the display stops flashing. The clock is now set and starts (the colon flashes).
SETTING THE SWITCH-ON TIME [ » TIMER « ]
If the Switch-on time feature is enabled then your Designer Audio Unit can wake you at your chosen time.
01) Using the appropriate button
* select the desired device/ source (CD, TAPE or TUNER).
02) Set up the source, i.e. for TUNER (RADIO) set the desired station, for TAPE (CASSETTE RECORDER) insert the tape and wind
to the correct place or insert a CD and if required program a track sequence.
03) Press and hold down the TIMER button
-. The display @ now shows TIMER.
NOTE: You have five seconds to complete the following steps. Otherwise the process is halted and you must begin
again with step 4.
04) Press the Display / operating indicator button
R twice. The time appears in the Display @ and TIMER flashes.
05) Press and hold down the MEMORY/CLK-ADJ button \. The hours indicator flashes.
06) Set the hours by pressing the Up/Forward button ) or the Down/Reverse button 8 as appropriate.
07) Press and hold down the MEMORY/CLK-ADJ button
\. The minutes indicator flashes.
08) Set the minutes by pressing the Up/Forward button ) or the Down/Reverse button 8 as appropriate.
09) Press the MEMORY/CLK-ADJ button \ again - the Switch on time is stored.
10) If you wish to be woken to a cassette: Press the Play button 3.
11) Then switch off the Designer Audio Unit (ON-/OFF-button
E).
ACTIVATE SLEEP FUNCTION [ » SLEEP « ]
You can set a time of between 90 and 10 minutes, after which the device switches itself off.
• To activate a Switch-off time of 90 minutes, press the SLEEP button
- once briefly.
• To set a shorter Switch-off time, keep the SLEEP button - pressed until the desired time is displayed.
•To switch off the Sleep function, press the SLEEP button
- repeatedly until the display @ no longer shows SLEEP.
6
