479775
42
Zoom out
Zoom in
Previous page
1/51
Next page
EasyGuard IP200
4.2. Specifications
Models
IP Camera
Power
DC 5V, 1A
Processors
RISC CPU, hardware video processing and compression.
Network interface
Ethernet 10BaseT/100BaseTX, Auto-MDIX, RJ-45
Wireless interface
IEEE 802.11g 6 - 54 Mbps
IEEE 802.11b 1 - 11 Mbps
Transmit power: 14.5dBm typically @ 802.11g
17.5dBm typically @ 802.11b
Receiver sensitivity: 54Mbps: Typical -73dBm @ 10% PER
11Mbps: Typical -86dBm @ 10% PER
Modes: Infrastructure and ad-hoc
Antenna gain: 1.8 dBi
Image sensor
RGB VGA 1/4 inch CMOS
Automatic exposure control, automatic white balance,
automatic gain control, automatic brightness control.
Light sensitivity
0.2 Lux ( IR led off )
0 Lux (with 10 meters IR leds on)
Automatically turn on the IR led in low light environment.
Lens
4.5 mm, F1.9, viewing angle: 55.6°, fixed iris.
focus range: 30 cm to infinity
Day & night IR lens
Motor controlled IR-cut filter (ICR).
Buttons
One reset button, to factory default settings
Indicators
One LED for internet connection status indication
One LED for Ethernet connection indication
Video compression
MPEG-4 Part 2 (ISO/IEC 14496-2) with motion detection,
profiles: Simple Profile, level 0-3
Resolutions
160x120, 320x240, 640x480
Frame rate
Up to 30 fps in all resolutions
Video streaming
MPEG-4
Separate frame rate/resolution/bandwidth settings for PC
and mobile.
Image settings
Resolution: VGA(640x480), QVGA(320x240),
QQVGA(160x120)
Bandwidth : 64k, 128k, 256k, 512k, 768k, 1M, 1.2M, 1.5M
bps
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easypix EasyGuard IP200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easypix EasyGuard IP200 in the language / languages: English as an attachment in your email.

The manual is 10,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Easypix EasyGuard IP200

Easypix EasyGuard IP200 Quick start guide - English - 1 pages

Easypix EasyGuard IP200 Quick start guide - German - 1 pages

Easypix EasyGuard IP200 Quick start guide - Dutch - 1 pages

Easypix EasyGuard IP200 Quick start guide - French - 1 pages

Easypix EasyGuard IP200 Quick start guide - Italian - 1 pages

Easypix EasyGuard IP200 Quick start guide - Spanish - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info