EasyGuard IP200
A: It’s probably because the internet bandwidth (internet speed) is not big enough.
Please try to apply for a better internet connection from your Internet Service
Provider or decrease the bandwidth settings of the IP Cam. You can adjust the
bandwidth requirement of the IP Cam either from the CamView software or login
into the web configuration page of the IP Cam to do the modification.
9. Does the IP Cam provide the recording function?
A: You can do the recording of the video/audio of the IP Cam from the CamView
software with the CamView software. You can also do the video/audio recording
to the standard NAS storage device. Another software CamPlay is needed to
playback the recorded vide/audio files.
10. Can I connect the IP camera directly to my PC/notebook with an Ethernet
cable?
A: If the IP camera is directly connected to your PC/notebook computer using an
Ethernet cable, the IP camera will automatically use an IP address called “auto
IP” with IP address 169.254.xxx.xxx. If your PC/notebook computer is configured
to DHCP, it will also use an “auto IP” address. But this will take about one minute
after the IP camera is connected to the computer and you need to make sure that
the WiFi interface on your PC/notebook computer is disabled. After about one
minute, you can run the CamView software to access the IP camera, the CAM ID
should be displayed on the “auto-search” list. You can then see the video by
double clicking the CAM ID icon. But you need to know that in this situation, other
local or remote computer can not see the video.
