EasyGuard IP200
3.7. Night mode control
The IP Cam is able to work both in day time and night time. There are some IR
LEDs that can let the IP camera see the objects in the night time. This night mode
control page is to control when the time the IR LEDs will be on. There are three ways
to control the night mode( IR LEDs ) :
1. Automatic day and night mode switch : the IP cam will automatically turn
on the IR LEDs when the night time is arrived or the environment is
becoming dark. There is a light sensor on the IP cam that is doing this
light detection.
2. Scheduled time of night mode : the IP Cam can also be scheduled to
turn on the IR LEDs in a time range of each day.
3. Manual night mode control : the IP Cam can be manually forced to night
mode( IR LEDs on ) or day mode( IR LEDs off ).
In order to get better video color display during day time and night time, there is
an ICR(IR Cutter Remover) in the IP Cam. This ICR will be controlled automatically
to filter out the IR(Infrared) light during the day time and allow the IR light to pass
during the night time. This make sure the video color quality is excellent compared to
other IP camera.
Figure 3-13: Night mode control page.
