703915
24
Zoom out
Zoom in
Previous page
1/52
Next page
24
Cleaning
CAUTION!
Make sure before cleaning the device that it is switched off and not connected to the mains
power! Remove the batteries.
Do not dismantle the housing of the sewing machine.
Do not use any caustic or abrasive cleaning agents to clean the device. These can damage
the surface.
Remove any fabric bres and remnants that may have collected using a ne brush.
If necessary, wipe the housing with a damp cloth and then wipe it dry.
Changing the Needle
Sewing machine needles are available in different sizes. Small needles are suitable for ne / delicate
fabrics and large needles for heavy fabrics. The needles which are supplied with the device are
suitable for average fabric strengths. If you want to sew a particularly tough or ne fabric, you
should purchase a suitable sewing machine needle and use it.
The needle must always be straight and sharp to ensure trouble-free sewing. Replace the needle
if it is bent, blunt or broken.
CAUTION!
Make sure the device is switched off and the plug is pulled out of the mains socket. Take the
batteries out of the device before replacing the needle.
1. Bring the needle up to its highest position with the handwheel.
2. Hold the needle rmly and loosen the needle clamp screw (15)
by turning it in the anticlockwise direction. You can now remove
the needle.
3. Insert the new needle up to the limit stop into the needle clamp.
The at side of the needle must be oriented towards the needle
clamp screw.
4. Hold the needle rmly and tighten the needle clamp screw.
CAUTION!
After replacing the needle, rst only check in manual mode by using the handwheel whether
the machine sews neat stitches. Only activate the On/Off switch when the needle is in the
correct position and you have persuaded yourself in manual mode that the machine will sew
neat stitches.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easymaxx Z02927 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easymaxx Z02927 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info